Skip to main content

Seaside, OR Environmental Rules: Flood Elevation Requirements (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

Residential, riverine zones
Lowest floor, including basement, one foot above BFE
Coastal V and VE zones
Lowest structural member bottom one foot above base flood level
Non-residential, riverine
At or above BFE, or floodproofed with engineer certification
Manufactured dwellings
Chassis frame beam bottom at or above BFE
Flood openings
Two openings, one square inch per square foot enclosed
Substantial improvement
Cost equals or exceeds 50 percent of market value
Penalty
Misdemeanor: fine up to $500.00, up to 180 days, or both

Summary

In Seaside riverine flood zones, new residential construction and substantial improvements must have the lowest floor, including basement, elevated a minimum of one foot above the Base Flood Elevation. In coastal V and VE zones the bottom of the lowest horizontal structural member must sit a minimum of one foot above the base flood level. Riverine non-residential buildings can instead be floodproofed.

152.5.2.3.2 RESIDENTIAL CONSTRUCTION A. New construction, conversion to, and substantial improvement of any residential structure shall have the lowest floor, including basement, elevated at a minimum of one (1) foot above the Base Flood Elevation (BFE). ... A. New construction, conversion to, and substantial improvement of any commercial, industrial, or other non-residential structure shall: 1. Have the lowest floor, including basement, elevated at or above the Base Flood Elevation (BFE) or ... B. The bottom of the longitudinal chassis frame beam shall be at or above Base Flood Elevation. ... A. All new construction and substantial improvements in Zones V1-V30 and VE, V, and coastal A zones (where base flood elevation data is available) shall be elevated on pilings and columns such that: ... 1. The bottom of the lowest horizontal structural member of the lowest floor (excluding the pilings or columns) is elevated a minimum of one foot above the base flood level; and

Full Breakdown

The elevation standards sit in Ordinance No. 2025-04, which repealed and replaced Chapter 152. For residential structures in riverine (non-coastal) Zones A1-A30, AH and AE, § 152.5.2.3.2 requires new construction, conversion and substantial improvement to have the lowest floor, including basement, elevated at a minimum of one foot above the Base Flood Elevation (BFE). The ordinance defines BFE as the elevation to which floodwater is anticipated to rise during the base flood, and the base flood as the flood with a one percent chance of being equaled or exceeded in any given year. Substantial improvement means an improvement whose cost equals or exceeds 50 percent of the market value of the structure before the start of construction.

Non-residential structures in those zones must either have the lowest floor, including basement, elevated at or above the BFE, or be floodproofed so the structure is watertight below the base flood level, with walls substantially impermeable to water, structural components that resist hydrostatic and hydrodynamic loads and buoyancy, and a registered professional engineer or architect certification provided to the Floodplain Administrator (§ 152.5.2.3.3). Applicants who floodproof are told that flood insurance premiums will be rated one foot below the floodproofed level. A manufactured dwelling needs the bottom of its longitudinal chassis frame beam at or above BFE (§ 152.5.2.3.4). Enclosed areas below the lowest floor must have flood openings: a minimum of two openings, a total net area of not less than one square inch for each square foot of enclosed area, and the bottom of every opening no higher than one foot above grade (§ 152.5.2.1).

In coastal high hazard areas, Zones V1-V30, VE, V and coastal A zones where BFE data is available, § 152.5.3.1 requires new construction and substantial improvements to be elevated on pilings and columns so the bottom of the lowest horizontal structural member of the lowest floor, excluding the pilings or columns, is a minimum of one foot above the base flood level, with the foundation anchored against flotation, collapse and lateral movement. A registered professional engineer or architect must certify the design. Where no regulatory floodway is designated, no new construction or substantial improvement is permitted in Zones A1-30 and AE unless the cumulative effect will not raise the base flood water surface elevation more than one foot and will not cause a net loss of flood storage volume (§ 152.5.2.3.1).

Violations & Fines

Violating the requirements of the chapter, including the elevation standards, is a misdemeanor punishable on conviction by a fine of not more than $500.00 or imprisonment for a period not to exceed 180 days or both (§ 152.3.4.2). A variance to build below the Base Flood Elevation needs good and sufficient cause, a finding of exceptional hardship, and a finding that it will not increase flood heights or add threats to public safety (§ 152.4.4.1(D)), plus written notice that premium rates will increase (§ 152.4.4.2).

Frequently Asked Questions

How high must a new Seaside home be above flood level?
In riverine zones, § 152.5.2.3.2 requires the lowest floor, including basement, of a new residential structure to be elevated at a minimum of one foot above the Base Flood Elevation. In coastal V, VE and coastal A zones, § 152.5.3.1 sets the same one foot minimum, measured from the bottom of the lowest horizontal structural member to the base flood level.
Does the elevation rule apply to remodels in Seaside?
It applies to substantial improvements, which the ordinance defines as any reconstruction, rehabilitation, addition or other improvement whose cost equals or exceeds 50 percent of the market value of the structure before the start of construction. Sections 152.5.2.3.2 and 152.5.3.1 apply their one foot elevation standards to new construction and substantial improvement alike.
What are the flood opening rules for enclosed areas below the lowest floor?
Section 152.5.2.1 requires enclosed areas below the Base Flood Elevation to equalize hydrostatic forces by letting floodwater in and out, to be used solely for parking, storage or building access, and either to be engineer certified or to have at least two openings with a total net area of not less than one square inch per square foot of enclosed area, the bottom of each no higher than one foot above grade.
How are coastal Seaside buildings elevated?
Under § 152.5.3.1, new construction and substantial improvements in V1-V30, VE, V and coastal A zones are elevated on pilings and columns. The bottom of the lowest horizontal structural member of the lowest floor, excluding the pilings or columns, must be at least one foot above the base flood level, and the foundation must resist flotation, collapse and lateral movement from wind and water loads.
Can a non-residential building in a Seaside flood zone skip elevation?
In riverine zones, yes, by floodproofing. Section 152.5.2.3.3 lets a non-residential structure be floodproofed so it is watertight below the base flood level instead of elevating the lowest floor to the BFE, but a registered professional engineer or architect must certify the design, and the applicant is told insurance premiums are rated one foot below the floodproofed level.

Sources & Official References

Other rules in Seaside

All Seaside rules

Compare Seaside to another location·View the Oregon environmental rules overview

Get notified when Flood Elevation Requirements in Seaside, OR changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.