Skip to main content
CityRuleLookup

Rowlett, TX Environmental Rules: Stormwater Management (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Residential curb overflow limit
1.5 inches max
Street flow cap
45 cfs
Design storm
100-year recurrence interval
Plans require
Texas-registered professional engineer

Summary

Rowlett requires storm sewer inlets sized to keep 100-year design-storm flows under 1.5 inches over residential street curbs, capping street flow at 45 cubic feet per second under the Development Code's drainage engineering standards.

Storm sewer inlets shall be provided along paved streets at such intervals as are necessary to limit the depth of flow as follows: (a) Residential streets. Based on parkway slopes of one-fourth of an inch per foot behind the curb, the 100-year design frequency flows shall not exceed a depth of one and one-half inches over the top of the curb. A maximum flow of 45 cfs will be allowed in the street.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 29).

Full Breakdown

The Development Code's drainage chapter sets engineering standards for every storm drainage facility built in the city. Storm sewer inlets along paved streets must be spaced to limit ponding: on residential streets, with parkway slopes of one-quarter inch per foot behind the curb, the 100-year design frequency flow may not exceed a depth of one and one-half inches over the top of the curb, with a maximum street flow of 45 cfs. Collector streets and major thoroughfares carry their own curb-overtopping limits. Complete engineering plans for the facilities must be prepared by a Texas-registered professional engineer and approved by the city engineer.

Violations & Fines

Development that doesn't meet the flow and inlet-capacity standards can be denied preliminary plat or site plan approval, and the city engineer can order corrections to the drainage design before construction proceeds.

Frequently Asked Questions

Does Rowlett regulate stormwater runoff from new development?
Yes. City Code § 77-502 sets engineering standards for storm sewers, channels, and inlets, requiring a 100-year design storm and capping residential street flow at 45 cfs over the curb.
Who approves stormwater plans in Rowlett?
The city engineer, based on plans prepared by a Texas-registered professional engineer and submitted with the preliminary plat or site plan.

Sources & Official References

Other rules in Rowlett

All Rowlett rules

Texas rules heatmap·Compare Rowlett to another location·View the Texas environmental rules overview

Get notified when Stormwater Management in Rowlett, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Stormwater Management in Nearby Cities

How other cities in Dallas County handle stormwater management.

Dallas, TX
Some Restrictions
Richardson, TX
Some Restrictions
Garland, TX
Some Restrictions
Grand Prairie, TX
Some Restrictions
Irving, TX
Some Restrictions
Carrollton, TX
Significant Restrictions