Skip to main content
CityRuleLookup

Pomona, CA Fire Regulations: Wildfire Zones (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Trigger
Property inside mapped Very High Fire Hazard Safety Zone
Construction standard
California Building Code Chapter 7A
Effective date
July 1, 2008
Map custodian
Building and safety division; city clerk
Adopting ordinance
Ordinance No. 4104
Related code
California Wildland-Urban Interface Code, 2025 Edition

Summary

New construction or building expansion inside Pomona's Very High Fire Hazard Safety Zone must meet Chapter 7A of the California Building Code, effective since July 1, 2008. The city adopted CAL FIRE's Very High Fire Hazard Safety Zone Maps by reference as Exhibit A to Ordinance No. 4104, kept on file with the building and safety division and the city clerk.

(a)Pursuant to Government Code Section 51179(a), this section adopts the California Department of Forestry and Fire Protection (CAL FIRE) "Very High Fire Hazard Safety Zone Maps," which shall be kept on file in the building and safety division and in the office of the city clerk as Exhibit A to Ordinance No. 4104.(b)Effective July 1, 2008, new construction or building expansion within any Very High Fire Hazard Safety Zone shall comply with all requirements of Chapter 7A of the California Building Code.

Source: Chapter 22 - Fire Prevention (Pomona City Code)View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: City Code: Supplement 31).

Full Breakdown

City Code Sec. 74-32 adopts, under the authority of Government Code Section 51179(a), the CAL FIRE Very High Fire Hazard Safety Zone Maps as the trigger for Pomona's local fire-hazard construction rules; the maps are on file in the building and safety division and the city clerk's office as Exhibit A to Ordinance No. 4104. Since July 1, 2008, any new construction or building expansion within a mapped Very High Fire Hazard Safety Zone must comply with all requirements of Chapter 7A of the California Building Code, the ignition-resistant construction standards covering roofing, exterior walls, vents, decking, windows and eaves.

Sec. 74-31 layers additional wildfire-specific rules on top: the city has adopted the California Wildland-Urban Interface Code, 2025 Edition, and the California Fire Code, 2025 Edition, as amended by Los Angeles County (the 2024 Los Angeles County Fire Code, based on the 2024 International Fire Code), most recently readopted by Ordinance No. 4364 on December 15, 2025. These construction codes are administered under Chapter 1 of the California Building Code and the California Administrative Code, 2025 Edition, per Sec. 74-1(a), meaning a wildfire-zone project goes through the same plan check and building permit process as any other build, with the added Chapter 7A ignition-resistant materials review folded in.

Property owners can confirm whether a specific parcel sits inside the mapped Very High Fire Hazard Safety Zone by requesting the maps on file with the building and safety division.

Violations & Fines

Building without the Chapter 7A ignition-resistant materials and assemblies required inside a mapped Very High Fire Hazard Safety Zone is a construction-code violation enforced by the building official; under the Code's general penalty, Sec. 1-7, an unpermitted or noncompliant violation is punishable as a misdemeanor with a fine up to the Penal Code Section 19 limit, up to six months in jail, or both, and each day a violation continues is a separate offense.

Frequently Asked Questions

Which Pomona properties must build to Chapter 7A wildfire standards?
Any parcel that falls inside CAL FIRE's Very High Fire Hazard Safety Zone Map, adopted by the city as Exhibit A to Ordinance No. 4104 and kept on file with the building and safety division and city clerk. New construction or an expansion of an existing building on such a parcel must meet Chapter 7A of the California Building Code.
Does Pomona use its own fire hazard maps or the state's?
Pomona adopted CAL FIRE's own Very High Fire Hazard Safety Zone Maps by reference under Government Code Section 51179(a) rather than drawing separate local maps, so the boundary a property owner needs to check is the CAL FIRE-designated Very High zone on file with the city.
What building code covers wildfire construction in Pomona besides Chapter 7A?
The city has also adopted the California Wildland-Urban Interface Code, 2025 Edition, and the Los Angeles County-amended California Fire Code, 2025 Edition, both administered alongside Chapter 7A through the same building permit and plan check process under Sec. 74-1.

Sources & Official References

Other rules in Pomona

All Pomona rules

California rules heatmap·Compare Pomona to another location·View the California fire regulations overview

Get notified when Wildfire Zones in Pomona, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Wildfire Zones in Nearby Cities

How other cities in Los Angeles County handle wildfire zones.

Altadena, CA
Some Restrictions
West Covina, CA
Some Restrictions
Palmdale, CA
Some Restrictions
Pasadena, CA
Some Restrictions
Norwalk, CA
Some Restrictions
Compton, CA
Some Restrictions
Lakewood, CA
Some Restrictions
Santa Monica, CA
Some Restrictions