Skip to main content
CityRuleLookup

Santa Cruz County, CA Landscaping Rules: Tree Trimming (2026)

Few Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified June 2026

Key Facts

Routine pruning
Generally no permit on private land
Coastal significant trees
No trimming >1/3 foliage w/o permit (16.34)
Riparian crossings
Leave at least 2/3 of mature-tree foliage
Fire 'limb-up'
10-15 ft recommended for canopy separation
Sensitive habitat trimming
May require Biotic Approval

Summary

In unincorporated Santa Cruz County, routine trimming of trees on your own property is generally allowed without a permit. But in the Coastal Zone, cutting more than one-third of a 'significant tree's' foliage requires a Significant Tree Removal permit (SCCC 16.34), and heavy trimming inside a riparian corridor or sensitive habitat may need approval (SCCC 16.30 / 16.32).

These county ordinances apply to unincorporated areas of Santa Cruz County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

Per County Code section 16.34.030, a 'significant tree' shall include any tree, sprout clump, or group of trees, as follows: Within the Urban Services Line or Rural Services Line, any tree which is equal to or greater than 20 inches d.b.h. (approximately 5 feet in circumference); any sprout clump of five or more stems each of which is greater than 12 inches d.b.h.; or any group consisting of five or more trees on one parcel, each of which is greater than 12 inches d.b.h.

Full Breakdown

Most ornamental pruning and routine maintenance on private property is exempt from permits. The key County limits are habitat- and coastal-based. 34 (Significant Trees Protection), which applies in the Coastal Zone, it is unlawful to remove, cut down, or trim more than one-third of the foliage of a 'significant tree' without an approved permit. 30). The defensible-space FAQ also recommends 'limbing up' trees 10 to 15 feet to separate the canopy from understory for fire safety, but doing so in the Salamander Protection Zone, sandhills, or other sensitive habitat may require a Biotic Approval. PG&E and utility line-clearance trimming for wildfire safety is a separate regulated program. Street trees in the County right-of-way are managed by Public Works.

Violations & Fines

Over-trimming a protected significant tree (more than one-third of foliage) in the Coastal Zone without a permit, or heavy pruning in a riparian/sensitive-habitat area without approval, is enforced under SCCC Title 19 (Enforcement of Land Use Regulations) with abatement orders, replanting, and penalties.

Frequently Asked Questions

Do I need a permit to trim my own trees?
Usually not for routine pruning on private property. However, in the Coastal Zone you may not trim more than one-third of a protected 'significant tree's' foliage without a Significant Tree Removal permit (SCCC 16.34).
Can I trim trees along a creek for fire safety?
Trim carefully. The County asks that near streams you remove only branches impinging on access and leave at least two-thirds of any mature tree's foliage; heavier work in a riparian corridor may need a riparian exception or Biotic Approval.

Sources & Official References

Other rules in Santa Cruz County

All Santa Cruz County rules

California rules heatmap·Compare Santa Cruz County to another location·View the California landscaping rules overview

Get notified when Tree Trimming in Santa Cruz County, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Tree Trimming in Cities Across Santa Cruz County