Charles County, MD Outdoor Lighting: Light Trespass & Shielding (2026)
Key Facts
- Core rule
- no light may 'unnecessarily illuminate' another lot
- No-cutoff fixture height cap, residential
- 12 feet
- Total-cutoff fixture height cap, residential
- 20 feet
- Recreational lighting post cap
- 40 feet
- Buffer-yard illumination cap
- 2 footcandles
- Governing provisions
- Zoning Ordinance §§ 297-305, 297-306
Summary
Charles County bans lighting that unnecessarily illuminates a neighbor's property. Site lighting must come from a concealed, low-intensity source, not spill onto adjoining land, and exterior fixtures must meet cutoff height limits set by § 297-306.
§ 297-306. Lighting standards. A. Site lighting shall be of low intensity from a concealed source, shall be of a clear white light which does not distort colors and shall not spill over into adjoining properties, buffers, roadways or in any way interfere with the vision of oncoming motorists. This section does not apply to public streetlighting. ... D. Exterior lighting plan. At the time any exterior light is installed or substantially modified and whenever a zoning permit is sought, an exterior lighting plan shall be submitted to the Zoning Officer in order to determine whether the requirements of this section have been met and that adjoining property will not be adversely impacted by the proposed lighting.
Full Breakdown
Charles County Zoning Ordinance § 297-305, Lighting requirements, prohibits 'excessive illumination': lighting within any lot that unnecessarily illuminates any other lot and substantially interferes with the use or enjoyment of that other lot is prohibited outright, and the code defines 'unnecessarily illuminates' by reference to the numeric standard in § 297-306. That companion section, Lighting standards (last amended October 29, 2024 by Bill No. 2024-13), requires site lighting to be of low intensity from a concealed source, of a clear white light that does not distort colors, and forbids it from spilling over into adjoining properties, buffers or roadways, or interfering with the vision of oncoming motorists; the rule exempts public streetlighting.
Exterior lighting must meet one of two cutoff standards: fixtures with no cutoff are capped at 12 feet in residential parking lots and 20 feet in nonresidential lots, while fixtures with total cutoff, meaning the bulb is fully shielded from a five-foot-tall observer at the cutoff angle, may reach 20 feet in residential parking areas and 30 feet in nonresidential areas. Outdoor recreational lighting for ball diamonds, playing fields and tennis courts is capped at a 40-foot post height and may exceed the cutoff angle only if shielded by orientation or a landscaped buffer, with illumination at the interior buffer-yard line capped at two footcandles.
Flickering or flashing lights are banned outright, and fixtures cannot sit within required buffer-yard areas except on pedestrian walkways. Anyone installing or substantially modifying exterior lighting, or seeking a zoning permit, must submit an exterior lighting plan to the Zoning Officer to confirm compliance and that adjoining property will not be adversely impacted.
Violations & Fines
Lighting that unnecessarily illuminates a neighboring lot in violation of § 297-305, or that exceeds the fixture-height and cutoff standards of § 297-306, is a zoning code violation; the Charles County Zoning Officer reviews exterior lighting plans and can require a noncompliant fixture be shielded, lowered or removed before a zoning permit is granted or upon a substantiated complaint.
Frequently Asked Questions
Is light trespass onto a neighbor's property illegal in Charles County?
How tall can an outdoor light pole be on my property?
Do I need to file anything before installing new outdoor lighting?
Sources & Official References
Other rules in Charles County
Compare Charles County to another location·View the Maryland outdoor lighting overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.