Skip to main content
CityRuleLookup

Rose Hill, NC Parking Rules: Driveway Rules (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Governing section
§ 94.040 Driveways; Construction
Surfacing rule
Concrete matching surroundings, or dirt/gravel if that surrounds it
Max width
40 feet per entrance
Permit required
Written permit before grading, § 94.037
Penalty
Up to $50 fine, 30 days jail via § 10.99

Summary

A driveway built in Rose Hill has to match its surroundings: portland cement concrete plus drainage structures where the area around it is already concrete, asphalt, or similarly paved, but dirt or gravel is allowed where that's what surrounds the site. Every driveway entrance is also capped at 40 feet wide, and building one on a public street first requires a written permit from the town.

(A) Driveways shall be constructed of portland cement concrete in one course as well as adequate drainage materials such as culverts, pipes, when required, if the immediate area abutting the driveway is generally constructed of materials that consist of concrete, asphalt paving material and/or drainage materials. In the event the predominant material used in the area surrounding the proposed driveway is dirt or gravel, then those same materials shall be allowed. (B) The maximum width of driveway entrances to streets shall be 40 feet per entrance.

Full Breakdown

Rose Hill's driveway rules sit in Chapter 94, Streets and Sidewalks, across four short sections. 037 requires a written permit from the Town Clerk or another authorized officer before anyone constructs, reconstructs, repairs, alters, or grades a driveway on the public streets, and guarantees every property abutting a town street one driveway at no cost to the owner. 038 requires the permit application to identify the owner, the party doing the work, the work location, attached plans, and the estimated cost, along with a fee set by the Board.

039 lets the issuing officer approve the permit once the Public Works Director signs off on the plans, the work meets the town's standard specifications, and the driveway will not unreasonably interfere with traffic, parking demand, or access to neighboring properties. 040, requires portland cement concrete in one course, plus drainage materials such as culverts or pipes where needed, wherever the immediate area around the driveway is already built up in concrete, asphalt, or similar paving. Where the surrounding area is predominantly dirt or gravel instead, the driveway may be built of that same unpaved material rather than concrete, so an unpaved driveway is allowed only where it matches its surroundings, not by default.

Every driveway entrance onto a street is capped at a maximum width of 40 feet. 99: a Class 3 misdemeanor, fine up to $50, and up to 30 days imprisonment, each day of violation a separate offense.

Violations & Fines

Grading, building, or altering a driveway on a public street without the § 94.037 permit, or paving one in concrete where none is required or in bare dirt where the surrounding area is paved, violates Chapter 94's driveway standards. Because no specific penalty is listed, § 94.999 defers to § 10.99: a Class 3 misdemeanor, fine up to $50, and up to 30 days imprisonment, each day a separate offense.

Frequently Asked Questions

Can I have a gravel or dirt driveway in Rose Hill?
Only if that matches your surroundings. Section 94.040 requires concrete construction where the area around the driveway is already concrete, asphalt, or paved, but allows dirt or gravel where the predominant surrounding material is dirt or gravel instead. An unpaved driveway isn't a default option in a paved neighborhood.
Do I need a permit to build or repair my driveway in Rose Hill?
Yes. Section 94.037 requires a written permit from the Town Clerk or another authorized town officer before anyone constructs, reconstructs, repairs, alters, or grades a driveway on the public streets, and the application under § 94.038 must include the work location, plans, and estimated cost.
How wide can a driveway entrance be in Rose Hill?
No more than 40 feet per entrance. Section 94.040(B) sets that as the maximum width for any driveway entrance onto a public street, regardless of the surfacing material used.

Sources & Official References

Other rules in Rose Hill

All Rose Hill rules

Compare Rose Hill to another location·View the North Carolina parking rules overview

Get notified when Driveway Rules in Rose Hill, NC changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.