Skip to main content
CityRuleLookup

Victoria, TX Sign Regulations: Digital Billboards (2026)

Significant Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Permit required
Yes, plus final inspection
Height limit
25 ft (35 ft near freeways)
Max sign area
400 square feet
Spacing rule
750 ft between billboards
Prohibited zones
Historic districts, residential areas

Summary

Victoria requires a single city permit for every off-premise billboard, digital displays included, and bars new billboards within 750 to 1,000 feet of another billboard, near residential areas, and inside historic or design districts.

No billboards shall be located: a.Within 200 feet of any on-premise freestanding sign on the same side of the street... c.Within 750 feet of any other billboard on the same side of a street other than a street designated as a "freeway" on the Master Thoroughfare plan... e.Within a designated historic district; f.Within the Placido Benavides Design District; g.Within a primarily residential area; h.Less than 300 feet, measured along the same side of the street, from any lot within a primarily residential area.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 42).

Full Breakdown

Any off-premise advertising sign in Victoria, digital or static, needs a single permit covering the lease, plot plan, engineered plans, and a final inspection before use, and permits expire after one year. Billboards face strict siting limits: 200 feet from an on-premise freestanding sign or signaled intersection, 750 feet from another billboard, 1,000 feet on freeway-designated streets, and they are barred from historic districts, the Placido Benavides Design District, and residential areas. Height tops out at 25 feet, 35 feet near freeways and arterials, and sign face area is capped at 400 square feet.

Violations & Fines

Erecting or altering a billboard without an approved permit and final inspection violates the UDO; the city can deny occupancy, require removal, and unpermitted or improperly sited signs are subject to enforcement action and removal at the owner's expense.

Frequently Asked Questions

Are digital or electronic billboards allowed in Victoria?
Yes, but historic districts flatly ban electronic message signs and billboards, and every billboard citywide needs a permit under UDO § 21-229.
How close can a billboard be to a home in Victoria?
Not within 300 feet along the same street, or 100 feet by radius, of any lot in a primarily residential area.
How large can a Victoria billboard be?
Up to 400 square feet, with height capped at 25 feet, or 35 feet within 100 feet of a freeway or primary arterial.

Sources & Official References

Other rules in Victoria

All Victoria rules

Texas rules heatmap·Compare Victoria to another location·View the Texas sign regulations overview

Get notified when Digital Billboards in Victoria, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.