Islip, NY Sign Regulations: Window Signs (2026)
Key Facts
- Window sign cap
- No more than 25% of total window area
- Applies in
- Bayport Overlay District, Montauk Highway corridor only
- Wall sign cap
- 75% of storefront width, letters up to 36 in
- Multitenant review
- Plan needs Planning Division approval
- Penalty
- Up to $2,000 fine or 15 days, § 68-421
Summary
Within the Bayport Overlay District along Montauk Highway, Code of the Town of Islip § 68-759C caps window signs at no more than 25% of the total window area, layered on top of the townwide Sign Ordinance in Article XXIX that Bayport businesses must otherwise follow.
§ 68-759. Signage. With the exception of the following, all provisions of the Sign Ordinance shall be complied with... C. Window signs, may not occupy an area greater than 25% of the total area of the window.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4826765; v112 updated 2026-02-24; through 02-24-2026).
Full Breakdown
The Bayport Overlay District (BOD), added to Chapter 68 in 2021 as Article LVI (§§68-751 through 68-760), covers designated parcels along the Montauk Highway commercial corridor and layers extra design standards on top of the townwide Sign Ordinance in Article XXIX. Section 68-759 states that, with listed exceptions, 'all provisions of the Sign Ordinance shall be complied with,' and multitenant buildings must additionally submit a signage plan to the Planning Division to keep design, color and materials consistent across tenants. One of the BOD-specific exceptions is the window sign cap in §68-759C: window signs may not cover more than 25% of the total window area, a firmer number than the general townwide rule in §68-397C, which defines a window sign as one 'entirely contained inside a building' advertising products, sales, rentals or events and sends area limits to the Schedule of Sign Regulations attachment rather than stating a percentage in the text itself.
Bayport layers on more: wall-mounted signs can't exceed 75% of storefront width or use letters over 36 inches tall (§68-759B); ground signs must be low, monument-style and landscaped at the base (§68-759D); and awning-sign lettering is capped at 80% of the valance height or 12 inches, whichever is less, with copy limited to half the awning's width (§68-759E). Sign permits in Bayport still route through the Building Inspector under §68-402, and the BOD-specific limits apply only within the mapped overlay parcels, not townwide.
Violations & Fines
Because Bayport's signage standards are part of Chapter 68, Zoning, violations fall under the general zoning penalty in § 68-421: a fine up to $2,000, imprisonment up to 15 days, or both, with each day of continued noncompliance a separate offense, and authority for the Commissioner of Planning and Development to issue a stop-work order.
Frequently Asked Questions
Does Islip limit how much of my storefront window can be covered by a sign?
Does this 25% window sign limit apply townwide in Islip?
What other sign rules apply in Bayport besides the window sign cap?
Sources & Official References
Other rules in Islip
New York rules heatmap·Compare Islip to another location·View the New York sign regulations overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Window Signs in Nearby Cities
How other cities in Suffolk County handle window signs.