Babylon, NY Solar Energy: Panel Permits (2026)
Key Facts
- Roof mounting
- Flush, max 6 inches proud
- Roof load cap
- 5 psf PV / 6 psf RSHW
- Contractor
- Must be LIPA-prescreened
- Drawings required
- PE/RA-certified layout + wiring diagram
Summary
To qualify for the Town of Babylon's fast-track solar permit, a residential installation must be flush-mounted, roof-load-limited, UL-listed equipment installed by a LIPA-prescreened contractor, per the § 89-94 standard-installation checklist.
For the purpose of this article, the term "standard installation" shall mean those installations which meet the following criteria and any subsequent amendment thereto: ... Installation on a residential structure with a single layer of roof covering; ... Be flush-mounted parallel to the roof surface and no more than six inches above the surface; ... Be installed by prescreened contractors as shown on a list maintained by LIPA.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4941158; v66 updated 2026-05-13; through 05-13-2026).
Full Breakdown
Section 89-94 spells out what counts as a 'standard installation' eligible for the Article X fast-track process: flush-mounted panels no more than six inches off a single-layer roof, an 18-inch clearance path to the ridge, roof loads capped at 5 psf for photovoltaic or 6 psf for solar hot water, UL 1703/1741-listed equipment, NEC compliance, and installation by a contractor on LIPA's prescreened list. Applicants submit a PE- or RA-certified drawing of the panel layout plus a one-line electrical diagram under § 89-94C, and the Town keeps an address list of installations to share with first responders. Projects outside these criteria, or needing Historic Preservation Commission review, fall outside the standard fast-track process.
Violations & Fines
Installing outside the § 89-94 standard-installation criteria, or using a contractor off LIPA's prescreened list, disqualifies a project from the fast-track process and its capped $25 fee, and unpermitted work draws Code fines under §§ 1-15 through 1-17.
Frequently Asked Questions
What makes a solar installation 'standard' under Town of Babylon rules?
Do I need an engineer's drawing to get a Town of Babylon solar permit?
Sources & Official References
Other rules in Babylon
New York rules heatmap·Compare Babylon to another location·View the New York solar energy overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Panel Permits in Nearby Cities
How other cities in Suffolk County handle panel permits.