Orlando, FL Trash & Recycling: Dumpster Rules (2026)
Key Facts
- Setback rule
- No placement in front/street-side setback
- Service apron
- 45 ft, 60,000 lb capacity minimum
- Height clearance
- 25 ft in service access area
- Pad standard
- 3,000 p.s.i. concrete, 6 in. thick
- Governing section
- City Code § 58.954
- Exceptions
- Refuse Collection Bureau, franchisee-certified
Summary
Orlando requires roll-off compactor containers to sit outside front/street-side setbacks and parking areas under City Code § 58.954, with a 45-foot paved service apron rated for 60,000 lbs and 25 feet of overhead clearance for the collection truck.
No roll-off compactor container pad(s) shall be located within any required front or street side yard setback. No such container shall be located in any required parking space or vehicular use area, or in any required bufferyard or landscaping area. Container Pads. Roll-off compactor container pad(s) shall be provided for all roll-off compactor containers, and shall be constructed of minimum 3000 P.S.I. concrete, steel reinforced, 6 inches thick... Service Access. A paved service vehicle access apron, constructed to a minimum 60,000 lb. /capacity requirement and extending a minimum of 45 feet in front of each roll-off compactor container is required. Service height clearance of 25 feet is required in the container service access area.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 92).
Full Breakdown
954 governs where roll-off compactor containers, the large commercial compactor units serviced by City-franchised haulers, may be placed. Like standard refuse containers, "no roll-off compactor container pad(s) shall be located within any required front or street side yard setback," and none may sit in a required parking space, vehicular use area, or bufferyard/landscaping area. steel-reinforced concrete, 6 inches thick, to the section's minimum dimension requirements. A paved service vehicle access apron is required, rated to a minimum 60,000-pound capacity and extending at least 45 feet in front of each compactor, with a minimum 25-foot service height clearance in the container access area so the collection truck can operate.
The code also sets electrical specifications for the compactor itself, industry-recommended 3-phase, 460/480-volt, 60-amp electrical service to each compactor location, though other configurations can be approved and certified serviceable by an authorized City Franchisee for specialized equipment. 954 lets the Refuse Collection Bureau grant exceptions to the dimensional pad and service-access requirements when a City Franchisee certifies the exception as serviceable. 955.
Violations & Fines
Siting a roll-off compactor in a front or street-side setback, required parking space, or bufferyard violates § 58.954, as does building a pad below the 3,000 p.s.i./6-inch concrete standard or failing to provide the required 45-foot, 60,000-lb-rated service apron and 25-foot height clearance. The Refuse Collection Bureau can require a franchisee-certified exception before deviating from these dimensional standards.
Frequently Asked Questions
Where can a roll-off compactor dumpster go on an Orlando commercial property?
What size access apron does a roll-off compactor need in Orlando?
Can the compactor pad requirements be waived?
Sources & Official References
Other rules in Orlando
Florida rules heatmap·Compare Orlando to another location·View the Florida trash & recycling overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.