Brookhaven, NY Building Safety: Electrical Permits (2026)
Key Facts
- Governing section
- Town Code § 16A-2
- Standard adopted
- National Electrical Code (NFPA 70)
- Chapter adopted
- L.L. No. 17-2000, effective 11-27-2000
- Who inspects
- Town-designated qualified inspectors only
- Inspector experience minimum
- 10 years' field experience
Summary
Town Code § 16A-2 requires all electrical systems and wiring installations in the Town of Brookhaven to conform to the National Electrical Code (NFPA 70), as adopted into the New York State Uniform Fire Prevention and Building Code, with inspections handled only by Town-designated qualified inspectors.
All electrical systems and wiring installations within the Town of Brookhaven shall conform to the requirements of the National Electrical Code™, also known as “National Fire Protection Association Code 70,” as specified in the New York State Uniform Fire Prevention and Building Code.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4966897; v79 updated 2026-05-28; through 05-28-2026).
Full Breakdown
Chapter 16A, the Electrical Code, was adopted by the Town Board on November 21, 2000 under Local Law No. 17-2000. Section 16A-1 states the chapter's purpose: ensuring resident and public safety for electrical systems for light, heat or power and signal systems operating on 50 volts or more on real property in the Town, by regulating installation and alteration of wiring, and also allowing private electric inspection entities to perform inspections when approved by the Town Board. Section 16A-2, last amended February 15, 2011 under Local Law No.
9-2011, sets the substantive standard: all electrical systems and wiring installations within the Town must conform to the National Electrical Code, also known as National Fire Protection Association Code 70, as specified in the New York State Uniform Fire Prevention and Building Code. Inspections are gatekept under § 16A-4, which limits them to qualified inspectors designated by the Town Board; an inspector must have at least 10 years' field experience in electrical maintenance, installation or inspection, hold an International Association of Electrical Inspectors certification for one- and two-family dwellings and general electrical work, and their sponsoring organization must carry general liability insurance of at least $1,000,000 per occurrence and $2,000,000 aggregate naming the Town as additional insured.
A former § 16A-3 banning aluminum wiring was repealed in 2018 and is now reserved, meaning the NEC standard itself, not a separate Town aluminum-wiring rule, governs that issue today.
Violations & Fines
Chapter 16A does not include its own penalty text in the sections read; electrical work is also subject to Chapter 16's building permit and inspection framework, where § 16-8C sets fines of up to $125 per day of violation, up to 15 days' imprisonment, or both, for noncompliant permitted work.
Frequently Asked Questions
What electrical code applies to work in the Town of Brookhaven?
Who can inspect electrical work in Brookhaven?
Is aluminum wiring banned in the Town of Brookhaven?
Sources & Official References
Other rules in Brookhaven
New York rules heatmap·Compare Brookhaven to another location·View the New York building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Electrical Permits in Nearby Cities
How other cities in Suffolk County handle electrical permits.