Skip to main content
CityRuleLookup

Babylon, NY Building Safety: Electrical Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Governing law
Town Code § 112-2
Adopted code
1965 National Electrical Code
Threshold
50 volts or more
Before connecting
Certificate of compliance required

Summary

Town of Babylon requires all wiring for light, heat, power, or signals over 50 volts to meet the 1965 National Electrical Code and pass inspection before an electrician may connect it to power.

All electrical installations described in § 112-1 shall be made in conformity with the requirements of the 1965 Edition of the National Electrical Code, published by the National Fire Protection Association, except where the provisions of this chapter or any other ordinances shall differently prescribe, in which event, compliance with the provisions of such ordinance shall be recognized as proper compliance with this chapter. The requirements of the National Electrical Code shall be those known as the "National Fire Protection Association Pamphlet No. 70," as approved and adopted by the National Fire Protection Association.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4941158; v66 updated 2026-05-13; through 05-13-2026).

Full Breakdown

Chapter 112 covers wiring, devices, and equipment for light, heat, power, or signal systems rated 50 volts or higher anywhere in the Town. Section 112-2 locks installations to the 1965 edition of the National Electrical Code (NFPA Pamphlet 70) unless the town's own rules set a different standard. Electrical Inspectors, from the Board of Fire Underwriters, Long Island Electrical Services, and Town-appointed inspectors, must inspect the work; § 112-12 bars starting wiring work before an inspection application is filed, and § 112-13 bars energizing it before a certificate of compliance issues.

Violations & Fines

Unlawful wiring or premature connection under §§ 112-12 to 112-13 is enforced as a chapter violation; penalties now run through Chapter 1's General Penalties article after § 112-16 was repealed in 2010.

Frequently Asked Questions

What electrical code does the Town of Babylon use?
The 1965 edition of the National Electrical Code (NFPA Pamphlet 70), adopted by § 112-2, unless the town's own chapter sets a different requirement.
Can I connect new wiring before inspection?
No, § 112-13 bars connecting wiring to a power source until a certificate of compliance is issued following inspection.

Sources & Official References

Other rules in Babylon

All Babylon rules

New York rules heatmap·Compare Babylon to another location·View the New York building safety overview

Get notified when Electrical Permits in Babylon, NY changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Electrical Permits in Nearby Cities

How other cities in Suffolk County handle electrical permits.

Islip, NY
Some Restrictions
Huntington, NY
Some Restrictions