Skip to main content
CityRuleLookup

Babylon, NY Building Safety: Building Inspections (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Stage 1
Roughing-in inspection before enclosure
Stage 2
Final inspection for certificate of approval
Pressure test
5 psi air test alternative
Water test
Pipes filled, joints checked watertight
Use restriction
No use before certificate issued

Summary

Plumbing and drainage work in the Town of Babylon goes through two required checks, a roughing-in inspection before pipes are enclosed and a final inspection before a certificate of approval issues, under Town Code § 170-18.

Roughing-in inspection. Upon the completion of rough plumbing and drainage work for which a permit was issued under the Plumbing Code, the Plumbing Inspector shall inspect and approve the said rough work before plumbing is enclosed.

B. Final inspection. Upon the completion of plumbing or drainage work for which a permit was issued under this Plumbing Code, the Plumbing Inspector shall inspect the said work and shall issue a certificate of approval of said work, if the work has been done in accordance with the Plumbing Code and other ordinances applicable thereto. However, if the plumbing or drainage work is in conjunction with the connection of any building or structure to Southwest Sewer District Number 3, no inspection shall be required. [Amended 3-2-1982 by Res. No. 4]

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4941158; v66 updated 2026-05-13; through 05-13-2026).

Full Breakdown

Once a Town of Babylon plumbing permit is issued, § 170-18 requires two inspections by the Plumbing Inspector: a roughing-in inspection of the rough pipe work before it is enclosed, and a final inspection after completion, which must pass before a certificate of approval is issued. Before covering, joints must also pass a water test (§ 170-19) or, with the Inspector's permission, a five-psi air test (§ 170-20) or a smoke test (§ 170-21). Under § 170-22 an owner may not use or allow the use of any plumbing or drainage system until the Plumbing Inspector has issued that certificate of approval.

Violations & Fines

Enclosing pipework before the roughing-in inspection, or using plumbing before the final certificate of approval issues under § 170-22, is a Code violation subject to the criminal and civil penalties in §§ 1-15 through 1-17 per § 170-23.

Frequently Asked Questions

What inspections does plumbing work go through in the Town of Babylon?
Town Code § 170-18 requires a roughing-in inspection before pipes are enclosed and a final inspection before the Plumbing Inspector issues a certificate of approval.
Can I use new plumbing before it's inspected?
No. Town Code § 170-22 makes it unlawful for an owner to use or allow use of plumbing or drainage until the Plumbing Inspector issues a certificate of approval.

Sources & Official References

Other rules in Babylon

All Babylon rules

New York rules heatmap·Compare Babylon to another location·View the New York building safety overview

Get notified when Building Inspections in Babylon, NY changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Building Inspections in Nearby Cities

How other cities in Suffolk County handle building inspections.

Islip, NY
Some Restrictions
Huntington, NY
Some Restrictions