Floyd County, GA Building Safety: Electrical Permits (2026)
Key Facts
- Governing law
- Floyd County Code § 2-6-3(e)
- Adopted code
- National Electrical Code, as amended by Georgia
- Enforcing office
- Rome-Floyd County Building Inspection Department
- Permit issuance
- Separate electrical permit required
- Records location
- 607 Broad Street, Room 211, Rome
Summary
Unincorporated Floyd County has adopted the National Electrical Code, as amended by the State of Georgia, to govern all electrical wiring, apparatus and fixtures, and it is unlawful to install wiring or electrical equipment without complying with the code and obtaining the required inspections.
Electrical code. There is hereby adopted for the purpose of the public health, welfare and safety, that certain state minimum standard codes known as the National Electrical Code, and all subsequent amendments thereto, as adopted and as amended by the State of Georgia, except such portions as are deleted, modified or amended in this article. Such code, including the adopted modifications and amendments, is hereby incorporated by reference, and made a part of this article as if fully set forth herein. Amendments shall be construed as superseding only that part of the section with which there is a conflict. Copies of such specifications, rules and regulations shall be kept on file and open for public inspection in the office of the building inspection department.
Full Breakdown
Section 2-6-3(e) of the Floyd County Code adopts the National Electrical Code, and all subsequent amendments as adopted by the State of Georgia, as the county's electrical code, with any deletions or modifications spelled out in the same article controlling over the state text. Copies of the adopted code and any local amendments are kept on file and open for public inspection at the building inspection department, 607 Broad Street, Rome. Section 2-6-1 makes it unlawful for anyone to install wiring, electrical apparatus or fixtures used with electricity unless they comply with this chapter, and the chief building inspector or a designee enforces the code and issues permits.
Permit fees are set from time to time by the Board of Commissioners and recorded at the building inspection department. 2(a)(8), electrical permits must be issued separately by the Building Official, or separately identified on the building permit, and the electrical trade cannot start work until its permit issues. 2, an electrical rough-in inspection confirming neutral, ground and service cable wiring must pass before interior walls can be covered, and permanent electric power cannot be connected to a structure until a certificate of occupancy has been issued; a temporary meter pack is used until all inspection phases are satisfactorily completed.
Violations & Fines
Violating Section 2-6-3(e) or wiring a structure without the required permit and inspections is unlawful under Section 2-6-1(d), punishable as provided in Section 2-1-8; each day the violation continues is a separate offense. Covering walls before the electrical rough-in inspection passes, or energizing permanent power before a certificate of occupancy issues, can trigger a stop-work order.
Frequently Asked Questions
What electrical code does Floyd County enforce?
Can my electrician start before the permit issues?
When can I get permanent power connected?
Sources & Official References
Other rules in Floyd County
Compare Floyd County to another location·View the Georgia building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.