Smithtown, NY Building Safety: Plumbing Permits (2026)
Key Facts
- Residential plumbing fee
- $55 first two, $29 each more
- Commercial plumbing fee
- $290 first two, $35 each more
- Max lead in solder
- 0.20%
- Gas pressure test fee
- $115 residential, $290 commercial
- Permit structure
- Separate permit alongside building permit
Summary
Smithtown requires a separate plumbing permit alongside any building permit, with a detailed drawing of every fixture and heating unit and a hard cap on lead solder. Residential plumbing permits cost $55 for the first two fixtures and $29 for each additional one; commercial rates run higher.
Simultaneous with the applicant's obtaining a building permit, he must: (1) Submit, in writing, a detailed drawing showing the exact number and location of each plumbing fixture and heating unit to be installed. (2) Obtain a separate permit from the Chief Building Inspector for this purpose. A permit for this purpose will not be granted unless the applicant submits specifications which limit the lead content of solder to be used in all new installations of interior plumbing carrying drinking water and all alterations thereof to a maximum of 0.20%.
Full Breakdown
Section 112-10(E) requires anyone obtaining a building permit to simultaneously submit, in writing, a detailed drawing showing the exact number and location of each plumbing fixture and heating unit to be installed, and to obtain a separate permit from the Chief Building Inspector for this purpose. 20%, a health-based cap the Town enforces at the permit stage. Fees for the plumbing permit are set out in § 112-11: residential work is billed at $55 for the first two fixtures and $29 for each additional fixture, while commercial plumbing permits cost $290 for the first two fixtures and $35 for each fixture beyond two.
A related gas-pressure test, often required when new fixtures tie into a gas line, costs $115 per meter per test residentially and $290 per meter commercially. All fees are due to the Building Department at the time of application, and § 112-11(A) specifies that no permit or certificate will be issued until every applicable fee has been paid in full. Because the plumbing permit is tied to the underlying building permit application under § 112-10, the same general application requirements, land description, valuation, owner and applicant information, apply before the Chief Building Inspector will process either permit.
Violations & Fines
Installing or altering plumbing without the required permit, or using solder that exceeds the 0.20% lead limit, is enforced as a building code violation under § 112-23. A first offense carries a fine of $1,000 to $2,500, a third offense within five years carries $4,000 to $15,000 or up to six months in jail, and the Chief Building Inspector can withhold a certificate of occupancy until the plumbing work is brought into compliance.
Frequently Asked Questions
Do I need a separate permit just for plumbing work in Smithtown?
How much does a Smithtown plumbing permit cost?
Is there a lead limit on plumbing solder in Smithtown?
Sources & Official References
Other rules in Smithtown
New York rules heatmap·Compare Smithtown to another location·View the New York building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Plumbing Permits in Nearby Cities
How other cities in Suffolk County handle plumbing permits.