Skip to main content
CityRuleLookup

Seminole County, FL Building Setbacks & Zoning: Lot Coverage Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

R-1 max lot coverage
No fixed % (setback-driven)
Multi-family open space
25% of parcel area
R-4 open space
35% of parcel area
R-1 min lot area
8,400 sq ft
Code section
LDC Table 30.7.3

Summary

Seminole County's Dimensional Standards Table (Sec. 30.7.3) controls building bulk through minimum lot area, yards, and an open-space requirement rather than a fixed maximum lot-coverage percent. Multiple-family and mobile-home districts must keep 25% (R-4: 35%) of parcel area as open space; single-family R-1 districts rely on setbacks and living-area minimums.

These county ordinances apply to unincorporated areas of Seminole County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

Open Space (11, 12): R-3 25%; R-3A 25%; R-4 35%; RM-1 25%; RM-2 25%; RM-3 25%; RP 25% (% of Parcel Area). (11) Natural lakes and/or conservation areas within a development site shall not be credited to a combined maximum of more than fifty (50) percent of the required open space.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 23 Update 1 | Land Development Code: Supplement 2).

Full Breakdown

Unlike many Florida counties, Seminole County's LDC Table 30.7.3 does not set a single 'maximum lot coverage' percentage for the single-family R-1 districts (the open-space column shows '-'). Instead, building bulk is controlled by minimum lot area (e.g., R-1 requires 8,400 sq ft; R-1AAAA 21,780; RC-1 43,560), minimum lot width, the front/side/rear setbacks, the 35-foot height cap, and minimum living area per unit. An Open Space requirement of 25 percent of parcel area applies to the R-3, R-3A, RM-1, RM-2, RM-3, and RP districts (35 percent in R-4) and to commercial and industrial districts. Natural lakes and conservation areas count toward no more than 50 percent of required open space (footnote 11).

Violations & Fines

Development that fails to provide required open space or violates the dimensional standards is caught at site-plan/plan review and requires a variance from the Board of Adjustment.

Frequently Asked Questions

What is the maximum lot coverage in Seminole County?
The R-1 single-family districts have no fixed maximum-coverage percentage in Table 30.7.3; bulk is set by lot area, setbacks, and the 35-foot height cap. Multiple-family and mobile-home districts must keep 25% (R-4: 35%) as open space.
How much open space must a multi-family project keep?
At least 25 percent of parcel area in the R-3, R-3A, RM, and RP districts (35 percent in R-4), per LDC Table 30.7.3. Lakes and conservation areas count toward no more than half of that requirement.

Sources & Official References

Other rules in Seminole County

All Seminole County rules

Florida rules heatmap·Compare Seminole County to another location·View the Florida building setbacks & zoning overview

Get notified when Lot Coverage Limits in Seminole County, FL changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.