Skip to main content

Building Setbacks & Zoning in Alpine, TX (2026)

3 verified building setbacks & zoning rules for Alpine, Texas, sourced directly from the municipal code and official government pages.

Verified from official government sources

Setback Rules

In Alpine, an R-1 one-family lot needs a 25 ft front yard, a 12 feet 6 inches street side yard, a 5 foot interior side yard and a rear yard of 10% of depth or not less than 15 feet. The R-2 multi-family table prints the same four figures. Architectural features cannot project into those setbacks.

Alpine TX Yard Setback Minimums for R-1 and R-2

Some Restrictions

Alpine Code App. C § II

Each site in the R-1 district shall be subject to the following site development regulations: Feature Regulations ... Front yard minimum 25 ft* Street side yard minimum 12 feet 6 inches* Interior side yard minimum 5 feet* Rear yard 10% of depth or not < 15 feet ... *No window sills, belt courses, cornices, and other architectural features will project within the setbacks stated above.

Structure Height Limits

In Alpine, a site in the R-1 one-family district is capped at 2½ stories or 35 feet. R-2 duplex, townhouse, triplex and quadplex sites carry the same cap, and R-3 apartment sites rise to 3 stories or 45 feet. Accessory buildings and carports on an R-1 lot cannot exceed the height or bulk of the primary structure.

Alpine TX Residential Structure Height Limits

Some Restrictions

Alpine Code App. C § II

Each site in the R-1 district shall be subject to the following site development regulations: Feature Regulations Lot width minimum 50 feet Height maximum 2½ stories or 35 feet ... Temporary/accessory building or structures ≤ 40% of required rear yard not to exceed height or bulk of primary structure Home occupations Section 8 Carports ≤ 40% of required front/side/rear yard not to exceed height...

Lot Coverage Limits

In Alpine, the R-1 one-family district limits impervious coverage to 60% all structures. The R-2 multi-family table prints the same 60%, while the R-3 apartment district allows an interior lot 70% and a corner lot 75%. Appendix C ties each cap to a site development table for the district.

Alpine TX Maximum Impervious Coverage by Residential District

Some Restrictions

Alpine Code App. C § II

Each site in the R-1 district shall be subject to the following site development regulations: Feature Regulations ... Residential density One primary dwelling unit per lot, not to include accessory structures Minimum dwelling areas (Footprint of Home) 1000 Sq Ft Maximum impervious coverage 60% all structures