Fence Regulations in Farmersville, TX (2026)
4 verified fence regulations for Farmersville, Texas, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Farmersville caps fence height at 40 inches in a required front yard and eight feet everywhere else, under City Code § 77-69(b). Front-yard fences must also be at least 50 percent open, and every street intersection needs 15 feet of clear vision back from the property corner along both streets.
Farmersville Fence Height Limits by Yard Location
Some RestrictionsFarmersville Code of Ordinances § 77-69(b)
(b)General fence and wall regulations. In any zoning district where a wall, fence, or screening separation is erected and is not required under the provision of subsection (a), the following standards shall apply:(1)The maximum height of a fence or wall in a required front yard shall not exceed 40 inches and shall be at least 50 percent open in construction. Combinations of berms and fences sha...
Fence Permit Requirements
All fences, walls and screening devices in Farmersville require a permit under City Code § 77-69(b)(10). For existing residential fences, subsection (b)(6)(a) specifically triggers a fence permit whenever more than 50 percent of the fence's length along a property line is being replaced.
Farmersville Fence Permit Required Over 50% Replacement
Some RestrictionsFarmersville Code of Ordinances § 77-69(b)(6)(a), (b)(10)
(6)Privacy fences on single-family and two-family residential lots.a.This section applies to replacement of residential fences or construction of new fences. A fence permit is required when more than 50 percent of the length of the fence along a property line is being replaced.b.Height shall not exceed eight feet as measured from the highest adjacent grade within ten feet of the fence. ... (10)...
Retaining Walls
Farmersville requires a retaining wall wherever a subdivision has a grade change over two and a half feet with a slope steeper than 1:2, and every wall must be engineered to the building code and approved by the building official under Code § 65-50.
Farmersville Retaining Wall Requirements
Some RestrictionsFarmersville Code of Ordinances § 65-50
(a)Retaining wall requirements. In general, the use of retaining walls shall be minimized, wherever possible, through minimal and balanced cut and fill on property. When property within or directly adjacent to a subdivision contains changes in elevation exceeding two and one-half feet and the slope exceeds one unit vertical in two units horizontal, a retaining wall shall be required at the loca...
Material Restrictions
Barbed wire and fence arms are banned outside Farmersville's LI and HI industrial districts under City Code § 77-69(b)(8). Residential privacy fences also face an approved-materials list: masonry, ornamental metal, cedar, redwood, composite and certain vinyl or picket fencing are allowed, while chain link, corrugated metal and secondhand materials are prohibited.
Farmersville Restricts Barbed Wire and Fence Arms
Significant RestrictionsFarmersville Code of Ordinances § 77-69(b)(6), (8), (9)
(6)Privacy fences on single-family and two-family residential lots. ... c.Approved materials:1.Masonry (brick, stone, reinforced cement concrete) or any other sustainable material with more than a 30-year life expectancy;2.Ornamental metal rail fencing;3.Cedar and redwood;4.Composite fencing;5.Vinyl fencing in flat white or flat natural tone colors such as rust or tan; and,6.Other wooden picket...
Looking for Collin County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Farmersville city rules.
Fence Regulations in Collin County →