Building Setbacks & Zoning in Glen Cove, NY (2026)
3 verified building setbacks & zoning rules for Glen Cove, New York, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In Glen Cove's R-2 Half-Acre Residence District, City Code § 280-56 sets a minimum front yard of 30 feet (or the prevailing front setback if greater), a 25-foot minimum rear yard, and a 20-foot minimum side yard on each side. Every other residential zone, R-1 through R-4B, carries its own separate setback schedule in the same Article of the Zoning Chapter.
Glen Cove R-2 District Yard Setback Minimums
Some RestrictionsGlen Cove City Code § 280-56.B(4)-(6)
§ 280-56. R-2 Half-Acre Residence District. ... (4) Front yard: The minimum front yard shall be 30 feet or the prevailing front yard setback, whichever is greater. ... (5) Minimum rear yard: 25 feet. (6) Minimum side yard: 20 feet each.
Structure Height Limits
Glen Cove's R-1A Two-Acre Residence District caps single-family construction at two and a half stories and 35 feet under City Code § 280-54.B(9). Citywide, § 280-45.Q measures that limit from existing grade to an imaginary plane parallel to finished grade, with peaked roofs measured to the ridge's midpoint.
Glen Cove R-1A Height Limit: 35 Feet
Some RestrictionsGlen Cove City Code §§ 280-45.Q, 280-54.B(9)
Q. Height. ... (1) The maximum height of a structure shall be measured vertically from the existing grade to an imaginary plane located the allowed number of feet above and parallel to the finished grade (see diagram below illustrating application of this plane to a structure with a peaked roof). For peaked roofs, height shall be measured to the midpoint of the roof. No portion of a peaked roof...
Lot Coverage Limits
Glen Cove caps building coverage in the R-2 Half-Acre Residence District at 15% of the lot under City Code § 280-56.B(10). The Zoning Chapter also ties a home's maximum interior floor area to that coverage figure, capping livable floor area at one and one-half times the maximum lot coverage expressed in square feet.
Glen Cove R-2 District Max Lot Coverage 15%
Some RestrictionsGlen Cove City Code § 280-56.B(10)
§ 280-56. R-2 Half-Acre Residence District. ... (10) Maximum coverage: 15%. ... (12) The maximum interior floor area of a single-family dwelling shall not exceed 1 1/2 times the maximum lot coverage, as expressed in square feet.
Looking for Nassau County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Glen Cove city rules.
Building Setbacks & Zoning in Nassau County →