Building Safety in Greenville, NC (2026)
6 verified building safety rules for Greenville, North Carolina, sourced directly from the municipal code and official government pages.
Verified from official government sources
Lead Paint
Greenville's Minimum Housing Code bars using interior paint that exceeds the lead pigment limit set by the federal Consumer Product Safety Commission in any dwelling, and requires exterior surfaces to be kept coated and free of flaking or peeling paint. Paint chips and dust cannot be left on any interior or exterior surface or on the premises.
Greenville Lead Paint Housing Standard
Some RestrictionsGreenville City Code § 9-1-95(I)
(I) Painting. Effective January 1, 1995, all exterior surfaces of dwellings not inherently resistant to deterioration shall be treated with a protective coating, such as paint or other suitable preservative, with sufficient frequency to prevent deterioration. All such portions shall be cleaned and free of flaking, loose or defective surfacing materials prior to painting or coating. All interi...
Carbon Monoxide Detectors
Greenville dwellings with a fossil-fuel heater, appliance, fireplace, or attached garage must have at least one operable carbon monoxide detector per level, listed by a nationally recognized testing laboratory such as UL.
Carbon Monoxide Detector Rule in Greenville
Some RestrictionsGreenville City Code § 9-1-97(B)
(B) Carbon monoxide detectors. Dwellings shall have a minimum of one operable carbon monoxide detector per level, either battery-operated or electrical, that is listed by a nationally recognized testing laboratory (such as Underwriters Laboratories). This section applies only to dwellings having a fossil-fuel burning heater, appliance, or fireplace, and in any building or structure having an at...
Building Permits
Greenville requires a written permit from the Inspections Division before anyone builds, alters, repairs, removes or demolishes any building or structure, unless the work is exempt under the State Building Code. The permit and a placard showing its number have to stay posted on site for the whole job.
Greenville Building Permit Requirements
Some RestrictionsGreenville City Code § 9-1-31(A)
(A) No person shall commence or proceed with the construction, alteration, repair, removal or demolition of any single building or other structure or part thereof without a written permit therefor from the Inspections Division except for building construction that is exempted from permit requirements under the North Carolina State Building Code. The copy of the permit shall be kept on the pre...
Electrical Permits
Greenville adopts both the North Carolina Electrical Code and the National Electrical Code by reference for every electrical installation in the city and its extraterritorial jurisdiction. Section 9-1-4(D) requires all wiring, installations and appurtenances to meet those minimum standards, and the Inspections Division's electrical inspector must sign off before service is connected.
Greenville Electrical Permit Rules
Some RestrictionsGreenville City Code § 9-1-3(H), (I)
(H) The most recent edition, including all subsequent amendments, of the North Carolina Electrical Code, as adopted by the North Carolina State Building Code Council, is hereby adopted by reference as fully as though set forth here. (I) The National Electrical Code, as adopted by the North Carolina Building Code Council, including all subsequent amendments, is hereby adopted by reference as...
Plumbing Permits
Greenville adopts the North Carolina Plumbing Code by reference for every plumbing system in the city and its extraterritorial jurisdiction. Any building meant for human habitation must have its plumbing installed, altered or repaired to that code's minimum standards, and the Inspections Division's plumbing inspector signs off before covered work can continue.
Greenville Plumbing Permit Requirements
Some RestrictionsGreenville City Code §§ 9-1-3(F), 9-1-4(B)
(F) The most recent edition, including all subsequent amendments, of the North Carolina Plumbing Code, as adopted by the North Carolina Building Code Council, is hereby adopted by reference as fully as though set forth here. ... (B) Every building or structure intended for human habitation, occupancy, or use shall have plumbing, plumbing systems, or plumbing fixtures installed, constructed,...
Building Inspections
Every permitted project in Greenville has to clear inspections at each construction stage before work continues. Section 9-1-22 requires permit holders to notify the Inspections Division as the job progresses, and a final inspection has to result in a certificate of compliance before anyone can occupy the finished building.
Greenville Building Inspection Process
Some RestrictionsGreenville City Code § 9-1-22(A)(2), (B)(1)
(2) All holders of permits, or their agents, shall notify the Inspections Division at each stage of construction and shall give inspectors free access to the premises for the purpose of making inspections. Approval shall be obtained from the Inspections Division before subsequent work can be continued. The inspections required shall conform to the provisions of the North Carolina Administrati...
Looking for Pitt County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Greenville city rules.
Building Safety in Pitt County →