Building Setbacks & Zoning in Kyle, TX (2026)
3 verified building setbacks & zoning rules for Kyle, Texas, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In the City of Kyle, Chart 1 in City Code Section 53-33 sets the minimum yard setbacks for every zoning district. The R-1-1 single-family district requires a 35-foot front setback, a 10-foot side setback, a 20-foot setback on corner lots facing a side street, and a 20-foot rear setback, on a minimum 8,190-square-foot lot with an 80-foot street-line width and a 35-foot height limit.
Kyle R-1-1 Front, Side and Rear Setbacks
Some RestrictionsKyle City Code § 53-33 (Chart 1), § 1-14
§ 53-33. General requirements and limitations. ... (j) Height and placement requirements. Except as otherwise specifically provided in this chapter, no building shall be erected or maintained within the required building setback line set forth herein, or which exceeds the height limits specified in chart 1 in subsection (k) of this section. ... Chart 1 Land Use District Front Setback (feet) Sid...
Structure Height Limits
In Kyle's R-1-1 single-family district, Chart 1 of City Code § 53-33 caps building height at 35 feet, and no structure anywhere in the city can exceed the height limit set for its zoning district except for a short list of exempted features like chimneys and church spires.
Kyle Residential Height Limit Rules
Some RestrictionsKyle City Code § 53-33
Height and placement requirements.Except as otherwise specifically provided in this chapter, no building shall be erected or maintained within the required building setback line set forth herein, or which exceeds the height limits specified in chart 1 in subsection (k) of this section. ... Public or semipublic service buildings, institutions or schools, where permitted, may be erected to a heig...
Lot Coverage Limits
Kyle's zoning code caps how much of a lot can be covered by roofs, driveways, patios and other impervious surfaces. Chart 2 in City Code § 53-33(l) sets that ceiling at 50% for the R-1-1 single-family district, and any single-family lot larger than 22,000 square feet is capped at 35% impervious cover regardless of its district.
Kyle Maximum Lot Coverage Limits
Some RestrictionsKyle City Code § 53-33
Impervious coverage.The maximum percentage of lot area which may hereafter be covered by improved surfaces and structures which do not allow for the penetration and/or percolation of stormwater into the soil beneath, such as, but not limited to, wood, stone, concrete, asphalt, roofing veneers, metal, swimming and decorative pools decking, brick, and hardened masonry pavers,[1] shall not exceed ...