Outdoor Lighting in Kyle, TX (2026)
3 verified outdoor lighting rules for Kyle, Texas, sourced directly from the municipal code and official government pages.
Verified from official government sources
Dark Sky Rules
In the City of Kyle, Article V of the zoning code bans light-polluting fixture types outright and requires dark-sky-style full cut-off design on qualifying properties. Mercury vapor lamps are prohibited entirely, wall-pack fixtures must carry a manufacturer full cut-off rating, barn-light fixtures need an opaque reflector, and advertising searchlights are banned under City Code §§ 53-1004 and 53-1010.
Kyle Outdoor Lighting: Full Cut-Off Fixtures Required
Significant RestrictionsKyle City Code §§ 53-1004, 53-1010(b)
Full cut-off fixturesmeans fixtures, as installed, that are designed or shielded in such a manner that all light rays emitted by the fixture, either directly from the lamps or indirectly from the fixture, are projected below a horizontal plane running through the lowest point on the fixture where light is emitted. ... Fixtures. ... (1) The installation of any mercury vapor fixture or lamp for u...
Light Trespass & Shielding
In the City of Kyle, Article V's shielding standard requires outdoor fixtures on qualifying nonresidential and multifamily sites to be shielded so no luminous element is visible from another property, and § 53-1011(d)(3) sets the trespass limit at zero: the photometric reading must be zero at every point three feet past the property line.
Kyle Requires Zero Light Trespass at Property Line
Heavy RestrictionsKyle City Code §§ 53-1004, 53-1011(b), 53-1011(d)(3)
Light trespassmeans light emitted from fixtures designed or installed in a manner that unreasonably causes light to fall on a property other than the one where the light is installed, in a motor vehicle driver's eyes, or upwards toward the sky. ... Shielding.All outdoor lighting, except governmental owned streetlights, shall be shielded so that luminous elements of the fixture are not visible f...
Billboard Lighting
Digital billboards along Interstate 35 in the City of Kyle must automatically dim so their brightness never exceeds 0.3 footcandles above ambient light, measured 250 feet from the sign, under City Code § 29-17(c)(7)i. Before a permit issues, the sign manufacturer must certify in writing that the brightness limit is factory-programmed and cannot be altered by the operator.
Kyle Digital Billboard Brightness Standard
Some RestrictionsKyle City Code § 29-17(c)(7)i.1, i.3
i. Display. 1. All CEVMS signs must automatically adjust the sign brightness so that the brightness level of the sign is no more than 0.3 footcandles over ambient light conditions at a distance of 250 feet from the sign. A digital display sign must be equipped with both a dimmer control and photocell that automatically adjusts the display's intensity according to natural ambient light condition...