Sign Regulations in Milpitas, CA (2026)
4 verified sign regulations for Milpitas, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Political Signs
In the City of Milpitas, political signs may go up on private property without a Sign Permit before an election, but Municipal Code § XIII-C.8.070.E.2 requires every one to come down within 14 days after the election it addresses or be declared a public nuisance. The City can then remove a noncompliant sign after 14 days' written notice and charge a $25.00 per-sign abatement fee.
Milpitas Political Sign Removal Rules
Some RestrictionsMilpitas Municipal Code § XIII-C.8.070.E.2
2.Political Signs. Political signs are a necessary part of our political life before an election. After the election is over, political signs become litter, create a health and safety problem, and encourage blight. ... a.Application. A "political sign" ... means a portable sign that is designed or designated to influence the action of voters in an upcoming election, including the election or de...
Digital Billboards
In the City of Milpitas, digital billboards are allowed only as part of a permitted billboard sign under Table C.8.050-D of Municipal Code § XIII-C.8.050.D. Every display must show static messages only: no movement, blinking, or optical illusion of movement anywhere in the structure, design, lighting, or picture. Each message must hold for at least four seconds, and brightness is capped at 0.3 foot-candles over ambient light measured 250 feet from the face.
Milpitas Digital Billboard Sign Rules
Significant RestrictionsMilpitas Municipal Code § XIII-C.8.050.D.2 (Table C.8.050-D)
Digital Billboards Digital billboards shall contain static messages only, and shall not have movement, or the appearance or optical illusion of movement, of any part of the sign structure, design, lighting, or pictorial segment of the sign Each message must be displayed for a min. of 4 seconds Must not exceed a brightness level of 0.3 foot-candles over ambient light levels, as measured using a ...
Window Signs
In the City of Milpitas, a window sign may not cover more than 25 percent of the contiguous window area it's mounted in, rising to 40 percent in the C2 General Commercial and HS Highway Service zones. Permanent window signs must sit on the interior of the window, on floors one through three only, and match the floor the business actually occupies. A Sign Permit from the Planning and Neighborhood Services Department is required before installation.
Milpitas Window Sign Area Limit
Some RestrictionsMilpitas Municipal Code § XIII-C.8.050 (Table C.8.050-N)
Window signs shall not exceed 25% of contiguous window area; however, window signs shall not exceed 40% of contiguous window area in the C2 and HS zones.
Freeway-Facing Signs
In the City of Milpitas, a billboard sign facing a freeway must sit adjacent to an interstate highway or state route and stay at least 1,000 feet from the next billboard on the same side of that route, under Table C.8.050-D of Municipal Code § XIII-C.8.050.D. Where possible, the sign's location and orientation must avoid or minimize direct exposure to nearby residential or lodging uses.
Milpitas Freeway-Facing Billboard Placement
Significant RestrictionsMilpitas Municipal Code § XIII-C.8.050.D.2 (Table C.8.050-D)
Sign Placement Must be placed adjacent to an interstate highway or state route Must be separated at least 1,000 ft from another billboard on the same side of the interstate or state route To the extent possible, must be located and oriented to avoid or minimize the direct exposure of the display to view from adjacent or nearby residential or lodging uses
Looking for Santa Clara County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Milpitas city rules.
Sign Regulations in Santa Clara County →