Building Setbacks & Zoning in Piscataway, NJ (2026)
3 verified building setbacks & zoning rules for Piscataway, New Jersey, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
Piscataway Township's Zoning Chapter sets a Township-wide front yard floor: no front yard may be less than 25 feet deep, and it must match the block's average front yard depth once more than half the block is built out. Corner lots must meet the front setback on both intersecting streets, and every yard facing a public street counts as a front yard except along Interstate 287.
Piscataway Yard Setback and Frontage Rules
Some RestrictionsPiscataway Township Code §§ 21-604, 21-605, 21-611, 21-616
§ 21-604. Setback Required for Corner Lots. Corner lots shall provide the minimum front setback requirements for the respective zone for both intersecting streets. § 21-605. Yards and Open Space Requirements. No yard or other space provided about any buildings for the purpose of complying with the provisions of this chapter shall be considered as providing a yard or open space for any other bui...
Structure Height Limits
Piscataway Township Code Section 21-807 caps building height in the LI-1 and M-1 Industrial Zones at three stories and 40 feet for a principal building, and one and a half stories and 25 feet for an accessory building. The limit applies under the Section 21-8 schedule for any permitted use or accessory use on an LI-1 or M-1 parcel of three acres or larger.
Piscataway LI-1/M-1 Industrial Building Height Limit
Some RestrictionsPiscataway Township Code § 21-807
§ 21-8. DEVELOPMENT IN LI-1 AND M-1 INDUSTRIAL ZONES. The development in the LI-1 and M-1 Industrial Zones of any permitted use or permitted accessory use on a parcel of land which is three acres or larger is forthwith subject to and to be in strict accordance with the following schedule of bulk and density requirements: § 21-80 ... ... 7. Maximum Heights. Principal building — three stories, 40...
Lot Coverage Limits
Piscataway Township Code Section 21-805 caps building coverage at 45 percent of lot area for development in the LI-1 and M-1 Industrial Zones. The cap applies under Chapter 21's Section 21-8 schedule, which governs any permitted principal or accessory use on an LI-1 or M-1 parcel of three acres or larger, alongside minimum lot size, yard and height standards in the same schedule.
Piscataway LI-1/M-1 Industrial Lot Coverage Limit
Some RestrictionsPiscataway Township Code § 21-805
§ 21-8. DEVELOPMENT IN LI-1 AND M-1 INDUSTRIAL ZONES. The development in the LI-1 and M-1 Industrial Zones of any permitted use or permitted accessory use on a parcel of land which is three acres or larger is forthwith subject to and to be in strict accordance with the following schedule of bulk and density requirements: § 21-80 ... ... 5. Maximum Coverage of Buildings. Percentage of Lot Area —...