Skip to main content
CityRuleLookup

Fence Regulations in Sherman, TX (2026)

4 verified fence regulations for Sherman, Texas, sourced directly from the municipal code and official government pages.

Verified from official government sources

Height Limits

In the City of Sherman, Texas, § 14.04.004 caps residential front yard fences at four feet and side or rear yard screening fences at eight feet. No fence can stand inside the 25 foot street-intersection sight triangle, and every fence needs a building permit and inspection.

Sherman TX Fence Height Limits and Sight Triangles

Some Restrictions

Sherman Code of Ordinances § 14.04.004

(1) No fence or screening device shall be placed within the following triangular areas at the intersections of streets and alleys due to sight distance requirements: (A) At all street intersections, the triangular area formed by the street right-of-way lines and a line connecting them at points twenty-five (25) feet from the intersection of the right-of-way lines. Depending on the curvature of ...

Fence Permit Requirements

In the City of Sherman, Texas, every fence and screening device needs a building permit and a city inspection, and the application must include a detailed site plan reviewed by the development services department. The permit rule sits in § 14.04.004(f) of the zoning ordinance.

Fence Permit Requirement in Sherman, Texas

Some Restrictions

Sherman Code of Ordinances § 14.04.004

(b) General standards.The following criteria shall apply to the installation of all fences and screening devices: ... (6) A detailed site plan for a fence or screening device shall be submitted to the development services department for review. ... (f) Permit required.Fences and screening devices as defined above shall be required to have a building permit, be inspected by the city and meet the...

Retaining Walls

In the City of Sherman, Texas, any structure built to hold dirt or earth is a retaining wall, and a wall four feet or greater measured from the base of the designed structure must be engineered. The engineered design goes to the city's engineering department before construction starts, and the engineer of record inspects and sends a stamped letter.

Retaining Wall Engineering Rules in Sherman, Texas

Some Restrictions

Sherman Code of Ordinances § 3.03.002

The following additions, amendments and/or deletions to the International Building Code, 2021 edition, are hereby adopted: ... (6) Retaining Walls. Any structure that is constructed to hold dirt or earth is considered a retaining wall. Such retaining walls must be engineered if the height of the structure is four (4) feet or greater measured from the base of the designed structure. The engineer...

Material Restrictions

In the City of Sherman, Texas, metal panel fences are banned in every district, electric fences and wires are banned along streets, alleys and shared property lines, and chainlink is barred from front yards. Barbed wire is unlawful along public streets and alleys unless the director approves it.

Fence Material Bans in Sherman, Texas

Significant Restrictions

Sherman Code of Ordinances § 14.04.004

(4) Electric fences or wires are prohibited along and adjoining any public street, alley or public grounds and any common property line. Such fences or wires shall not be erected, maintained, re-erected or repaired. ... (7) Prohibited materials.Metal panel fences are not permitted in any district. ... Chainlink, woven wire mesh or similar materials are not considered decorative fencing and are ...