Skip to main content
CityRuleLookup

Fairfax County, VA Outdoor Lighting: Billboard Lighting (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Governing section
§ 7101.1.B
Standard applied
Outdoor lighting performance standards (§5109)
Electronic sign brightness cap
100-300 nits, photocell dimmed
Enforcement
Zoning Administrator infraction

Summary

Fairfax County requires every illuminated sign, including electronic and billboard-style displays, to meet the same outdoor lighting performance standards the zoning code sets for all other fixtures under Section 5109.

These county ordinances apply to unincorporated areas of Fairfax County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

B. Sign Illumination

Illumination of signs must conform to the performance standards for outdoor lighting as set forth in Section 5109.

C. Associated Service Uses

Each associated service use permitted in accordance with Article 4 of this Ordinance is allowed a single building-mounted sign not to exceed 15 square feet in area, which is calculated as part of the total allowable building-mounted sign area for the building.

2. Signs in Residential Districts

A. Signs Allowed in R Districts

The following signs are allowed with approval of a sign permit in an R district (which includes residential areas of P districts per Section 9100):

(1) In a single-family residential subdivision or for a stacked townhouse development, a freestanding sign is

allowed at each major vehicular entrance, not to exceed 30 square feet in area or eight feet in height. More than one sign may be placed at each major vehicular entrance, but the total of all signs at a single vehicular entrance cannot exceed 30 square feet in area. These signs must be subject to an agreement, located within an easement recorded for signage purposes, or on common area located at the vehicular entrance.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published.

Full Breakdown

Zoning Ordinance § 7101.1.B states that illumination of signs must conform to the performance standards for outdoor lighting set forth in Section 5109, folding sign lighting into the county's general glare, shielding, and brightness rules rather than giving billboards a separate lighting code. Electronic display signs get an added, more specific cap in § 7101.1.A(4): a required photocell that dims automatically at sunset to 100 nits in residential districts and 300 nits in commercial, industrial, and Planned districts, reduced to 100 nits within 150 feet of a single-family dwelling.

Violations & Fines

A sign whose lighting exceeds Section 5109's outdoor lighting performance standards, or an electronic display without an automatic dimming photocell, is a zoning infraction the Zoning Administrator can order corrected or removed.

Frequently Asked Questions

Do illuminated signs in Fairfax County follow special lighting rules?
No separate rule. Section 7101.1.B requires sign illumination to meet the same outdoor lighting performance standards in Section 5109 that apply to all other fixtures.
Is there a brightness limit for electronic billboards specifically?
Yes, electronic display signs must photocell-dim to 100 nits in residential areas and 300 nits elsewhere per § 7101.1.A(4).

Sources & Official References

Other rules in Fairfax County

All Fairfax County rules

Compare Fairfax County to another location·View the Virginia outdoor lighting overview

Get notified when Billboard Lighting in Fairfax County, VA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Billboard Lighting in Cities Across Fairfax County