On county roads, yellow curbs are for loading freight or passengers and white curbs for brief passenger loading or mail (Sec. 7200). For new development, the Non-Coastal Zoning Ordinance requires off-street passenger and materials loading areas, with the number and size of loading spaces set by land use and floor area (Sec. 8108-8).
Loading in unincorporated Ventura County is regulated both at the curb and on private development sites. On county-maintained roads, Traffic Ordinance Sec. 7200 sets the curb-color loading rules: in a yellow zone it is unlawful to stop, stand, or park except for a reasonable time not exceeding three minutes for loading or unloading passengers, and not exceeding two hours for loading or unloading freight between 8:00 a.m. and 6:00 p.m. (except Sundays and holidays); a white zone is limited to about three minutes for loading or unloading passengers or depositing mail in an adjacent mailbox. For new commercial and industrial projects, the Non-Coastal Zoning Ordinance Sec. 8108-8 requires off-street loading. Sec. 8108-8.2 requires all commercial and industrial land uses to provide and maintain off-street materials loading spaces, with the number set by gross floor area (for example, most commercial/industrial uses need one space up to 15,000 sq. ft., scaling up to five spaces at 150,000 sq. ft. or more). Spaces serving single-unit trucks must be at least 10 feet wide, 30 feet long, and 14 feet high, and spaces serving larger freight vehicles (including semi-trailers) at least 12 feet wide, 55 feet long, and 15 feet high (Sec. 8108-8.2.3). Loading spaces must be located outside required front or side setbacks and away from residential uses, and the decision-making authority may waive or modify the requirement where infeasible.
Overstaying a yellow or white curb loading zone on a county road (beyond the 3-minute passenger or 2-hour freight limits) is a parking violation under Sec. 7200. For development, failing to provide or maintain the required off-street loading spaces, or undersized/misplaced loading areas, is a zoning compliance issue under Sec. 8108-8.
Other ordinances people look up for this city. Green dot = verified primary-source excerpt.
Fillmore, CA
Fillmore establishes noise level limits measured at property lines, with different standards for residential and agricultural zones. The rural setting and ag...
Fillmore, CA
Vehicle noise on public streets is governed by CA Vehicle Code §27007 (95 dBA exhaust limit). CVC preempts local ordinances for vehicles on public roads.
Fillmore, CA
Fillmore regulates industrial and commercial noise near residential areas through its zoning code and noise ordinance. Agricultural operations, which are com...
Fillmore, CA
Fillmore regulates noise through the Fillmore Municipal Code. Quiet hours are generally enforced between 10 PM and 7 AM on weekdays and weekends. Persistent ...
Fillmore, CA
Fillmore regulates amplified music under its noise ordinance. Amplified sound must not disturb neighboring residents, particularly during quiet hours. Specia...
Fillmore, CA
Fillmore's zoning ordinance typically allows 6 ft fences in side and rear yards, and 3–4 ft in front yard setback areas for residential zones. Verify exact l...
See how Fillmore's loading zones rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.