Skip to main content
CityRuleLookup

Waynesville, MO Sign Regulations: Freeway-Facing Signs (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Where allowed
Property fronting I-44 only
Max sign face
672 sq ft
Max height
50 feet
Spacing
1,000 ft from next sign/residential district
Setback
50 ft from right-of-way

Summary

Waynesville allows freeway-facing billboards only on property fronting Interstate 44, outside residential and planned-residential districts, under § 510.090's 'standard outdoor advertising structures' rule, capping each face at 672 square feet, 50 feet in height, and requiring 1,000 feet of separation from the next billboard or a residential district.

Standard outdoor advertising structures (billboards). Where permitted. Advertising signs complying with all the requirements of this Chapter shall be permitted upon all property within the City of Waynesville having frontage on Interstate Highway 44, with the exception of those properties within any residential or planned residential district. ... The maximum area for any one (1) sign shall not exceed six hundred seventy-two (672) square feet in size per face excluding extensions and embellishments, with a maximum width of fourteen (14) feet and a maximum length of forty-eight (48) feet inclusive of border and trim, but excluding the base, apron, supports and other structural members. ... The maximum height shall not exceed fifty (50) feet from the highest point on the sign to surrounding grade or street level, whichever is higher. ... No such sign shall be erected within one thousand (1,000) lineal feet of an existing sign on the same side of the highway or interstate.

Full Breakdown

Section 510.090's billboard provision permits 'standard outdoor advertising structures' on any property in Waynesville with frontage on Interstate Highway 44, except property inside a residential or planned residential district; inside a planned development district, or on a parcel with a conditional use permit, a billboard is allowed only when specifically authorized on the final development plan or permit. Each sign face is capped at 672 square feet, excluding extensions and embellishments, with a maximum width of 14 feet and length of 48 feet inclusive of border and trim; extensions above the sign cannot exceed 96 square feet total or add more than five and one-half feet of height, and embellishments cannot project more than one foot from the sign face.

The maximum height for the whole structure is 50 feet from the highest point to the surrounding grade or street level, whichever is higher. Spacing rules keep billboards apart from each other and from housing: no sign may stand within 1,000 linear feet of an existing sign on the same side of the highway, within 1,000 feet of a residential district, or within 500 feet of an interchange, at-grade intersection or safety rest area, and every billboard needs a 50-foot front setback from any public right-of-way or private roadway easement. The rule also bars a billboard from obstructing an official traffic sign, signal or a driver's view of the roadway.

Violations & Fines

A billboard erected inside a residential or planned residential district, oversized past the 672-square-foot face limit or 50-foot height cap, or placed within 1,000 feet of another sign or a residential district violates § 510.090's siting standards. A sign that also blocks a traffic signal or a driver's sightline is a separate violation of the same section, and the City can enforce noncompliant advertising structures through the same removal and general-penalty mechanisms, § 510.050 and § 100.020, that apply to other unlawful signs.

Frequently Asked Questions

Can I put up a billboard along I-44 in Waynesville?
Only on property that actually fronts Interstate 44 and only outside residential or planned residential districts; § 510.090 permits 'standard outdoor advertising structures' there subject to size, height and spacing limits, and requires specific authorization inside a planned development or conditional-use parcel.
How big can a freeway billboard be in Waynesville?
Section 510.090 caps each sign face at 672 square feet, excluding extensions and embellishments, with a maximum width of 14 feet and length of 48 feet, and limits the whole structure to 50 feet in height from the surrounding grade or street level.
How far apart do billboards have to be along I-44 in Waynesville?
Section 510.090 requires 1,000 linear feet between a new sign and an existing one on the same side of the highway, 1,000 feet from a residential district, and 500 feet from an interchange, at-grade intersection or safety rest area.

Sources & Official References

Other rules in Waynesville

All Waynesville rules

Compare Waynesville to another location·View the Missouri sign regulations overview

Get notified when Freeway-Facing Signs in Waynesville, MO changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.