Skip to main content
CityRuleLookup

Beaumont, CA Sign Regulations: Window Signs (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Window area covered
30 percent of window area
Absolute cap
150 square feet per street frontage
Multi-story buildings
First floor windows only
Maximum height, one-story building
20 feet above finished grade
Display period
45 days
Sign permit
Not required

Summary

In the City of Beaumont, California, on-site temporary window signs with a commercial message can cover 30 percent of the window area, up to 150 square feet per street frontage, on the first floor only of multi-story buildings. They can stay up 45 days and need no sign permit.

B.Commercial Temporary Signs. Commercial temporary signs distinguish between on-site and off-site and are subject to the following regulations: COMMERCIAL TEMPORARY SIGNS Sign Criteria Limitation ... (3) On-Site Temporary Window Signs Displaying a Commercial Message (Commercial zone, and for Commercial Uses in Industrial or Industrial/Business Park Zones When Approved as Part of a Uniform Sign Program) Window Area: 30 percent (on multi-story buildings, only the windows on the first floor may be counted), but in no event shall window signs exceed 150 square feet per street frontage Placement: First floor only on multi-story buildings Maximum Height: 20 feet in height above finished grade on one-story buildings Time Limitation: 45 days Sign Permit Required: No

Full Breakdown

Section 17.07.080.B(3) of the Beaumont Municipal Code sets the temporary window sign standard. It applies to on-site temporary window signs displaying a commercial message in a commercial zone, and to commercial uses in industrial or industrial/business park zones when approved as part of a Uniform Sign Program. Coverage is capped at 30 percent of the window area, and on multi-story buildings only the first floor windows count and only first floor windows can carry the signs. No matter the percentage, window signs cannot exceed 150 square feet per street frontage.

On one-story buildings a window sign can rise no higher than 20 feet above finished grade. Each display can last 45 days, and no sign permit is required. Section 17.07.050 measures window area as the total area of a window on which signs can be mounted, and adjoining panes less than six inches apart count as one window. Section 17.07.070.B separately exempts permanent window signs of four square feet or less that are limited to business identification, hours of operation, address and emergency information, and requires paper signs rotated on a regular basis to have a fastening device for a more permanent look. Section 17.07.070.G.2 requires every sign to be kept in first-class condition and cracked, broken or missing-copy portions repaired within 30 days of City notification.

Violations & Fines

The Community Development Director enforces the sign chapter under Section 17.07.030.A. A violation is a continuing violation, a nuisance and a zoning violation under Section 17.07.070.F, and the City Attorney can seek an injunction with costs and attorney's fees. Failing to repair a damaged sign within 30 days of notice is a zoning violation. Fines under Section 1.16.030 run up to $100, $200 and $500 for the first, second and later violations within one year.

Frequently Asked Questions

How much of my storefront window can be covered in Beaumont?
Section 17.07.080.B(3) allows 30 percent of the window area, and in no event more than 150 square feet of window signs per street frontage. On a multi-story building only the first floor windows are counted, so upper floor glass cannot be used to reach the percentage. The rule covers commercial messages on temporary window signs.
Do I need a sign permit for a window banner or poster?
No. The table lists sign permit required as No for on-site temporary window signs, and Section 17.07.070.B.13 exempts them from the sign permit process. The exemption does not cover Title 15 building or electrical permits if any are needed. In industrial zones the signs must be approved as part of a Uniform Sign Program.
How long can a temporary window sign stay up?
The time limitation is 45 days. After that the sign must come down under Section 17.07.080.B(3). Permanent window signs are different: Section 17.07.070.B.1 exempts them from permits only if they are four square feet or smaller and limited to business identification, hours of operation, address and emergency information.

Sources & Official References

Other rules in Beaumont

All Beaumont rules

California rules heatmap·Compare Beaumont to another location·View the California sign regulations overview

Get notified when Window Signs in Beaumont, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Window Signs in Nearby Cities

How other cities in Riverside County handle window signs.

Corona, CA
Some Restrictions
Moreno Valley, CA
Light Restrictions
Murrieta, CA
Some Restrictions
Palm Springs, CA
Some Restrictions
Riverside, CA
Some Restrictions
Temecula, CA
Some Restrictions