Rowlett, TX Sign Regulations: Window Signs (2026)

Window N/A 40% of the window area N/A N/A The 40 percent is measured per façade of the premise or lease space and applies only between 10:00 p.m. and 7:00 a.m. No window signage is allowed above the first floor except in multi-level facilities that have direct exterior entries. Wall N/A The greater of 10% of the façade or 60 sq. ft. combined Equal to ⅓ height of façade up to 10 ft. 75% of façade width Shall not project more than 30 inches from the wall. Awning N/A The greater of 10 % of the façade or 60 sq. ft. combined Equal to ⅓ height of façade up to 10 ft. 75% of façade width If wall and awning signs are to be used on the same façade, the combined area shall not exceed the area permissible by a wall sign. Incidental 1 per structure or façade 70 sq. in. N/A N/A None Projecting 1 per premise 12 sq. ft. N/A May project horizontally four ft. Eight ft. of clearance is required if projecting more than one ft. Shall not be closer than two feet from the back of the curb nor encroach in TXDOT Right-of-Way. If wall or awning and projection signs are to be used on the same façade, the combined area shall not exceed the area permissible by a wall sign. Marquee 1 per premise 100 sq. ft. Equal to ⅔ the building height N/A Fourteen ft. of clearance required. Shall not be closer than two feet from the back of the curb nor encroach in TXDOT Right-of-Way. Blade 1 per building 60 sq. ft. Equal to ⅔ the building height N/A Eight ft. of clearance is required.