Reedley, CA Swimming Pools & Spas: Pool Permits (2026)

Under Reedley Municipal Code Section 9-1-1 (Adoption of Codes), the city adopts the California Building Code including residential pool and spa construction requirements. A building permit must be obtained from the Reedley Building Division before any pool, spa, or hot tub construction begins. The application requires a site plan showing the location of all property lines, existing structures, the proposed pool location, and distances to property lines and structures. Plans must demonstrate compliance with the California Building Code for structural, electrical, plumbing, and mechanical requirements. Under the California Swimming Pool Safety Act (Health and Safety Code Sections 115920-115929), all new residential pools and spas must include at least one of seven approved drowning prevention safety features, including pool enclosure fencing, removable mesh fencing meeting ASTM F2286 standards with a self-closing and self-latching gate, or an approved safety pool cover meeting ASTM F1346 standards. Pool barrier fences must be at least 60 inches tall with no gaps allowing a 4-inch sphere to pass through. Gates must open outward from the pool, be self-closing, and self-latching. Reedley zoning code Section 10.34.050 addresses required fencing and walls, which may include pool barrier requirements. Electrical installations must comply with California Electrical Code requirements for ground-fault circuit interrupters and bonding.