Skip to main content
CityRuleLookup

Florence County, SC Zoning Overlays & Bonuses: Downtown Design Guide (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

District
Corridor Overlay District, Chapter 30, Division 7
Adopted
Ord. No. 21-2023/24, Jan. 18, 2024
Prohibited materials
Unfinished concrete block, plain sinewave sheet metal
Color rule
Subtle, neutral, or earth-tone colors only
Applies with
Underlying base zoning district regulations

Summary

Unincorporated Florence County has no downtown-specific design code, but Chapter 30's Corridor Overlay District (§§ 30-79.1 through 30-79.10) is the county's closest equivalent: it layers building material, color, and site-design standards on top of the base zoning along designated corridor roadways.

These county ordinances apply to unincorporated areas of Florence County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

(a)Effect. The corridor overlay zoning district regulations of this division apply in addition to underlying (base) zoning district regulations to impose specific development regulations for properties within the corridor district. ... (a)Materials. Unfinished concrete block masonry and plain corrugated/sheet metal (sinewave) shall be prohibited on all exterior building faces. ... (b)Color.(1)All colors used on buildings and structures must be subtle, neutral, or earth tone or otherwise relate to appropriate historic building colors found within the county. Luminescent, sparkling, reflective, fluorescent, and intense colors are prohibited.

Full Breakdown

Unincorporated Florence County does not maintain a downtown historic district code; its comparable design-standards instrument is Division 7 of the zoning ordinance, the Corridor Overlay District, added by Ord. No. 21-2023/24 (Jan. 18, 2024) and amended by Ord. No. 77-2023/24 (Aug. 15, 2024). 1(a), the corridor overlay's regulations apply on top of the underlying base zoning district, and wherever the two conflict, the overlay controls. 3 sets the building and structure design rules: unfinished concrete block masonry and plain corrugated or sheet metal ('sinewave') siding are prohibited on every exterior building face, though decorative styles such as box-rib or B-deck corrugated metal are allowed as accent material in residential and mixed-use districts.

Building and structure colors must be subtle, neutral, earth tone, or tied to the county's historic building palette; luminescent, sparkling, reflective, fluorescent, and intense colors are barred outright, and metal surfaces must be brushed-finish or painted in muted tones to cut glare. The same section requires buildings fronting the corridor roadway to orient their primary facade toward that roadway, sets a minimum six-foot depth for front stoops and porches, and requires fuel-dispensing canopies to sit in the side yard behind the building line. 10), all administered through the same zoning permit process as the rest of Chapter 30.

Violations & Fines

Corridor overlay design violations, such as unfinished block or prohibited sheet-metal siding, an unapproved color scheme, or a building that fails to face the corridor roadway as § 30-79.3 requires, are enforced through the county's standard zoning compliance and building permit review; noncompliant plans are not approved for a certificate of zoning compliance until the design standards of Division 7 are met.

Frequently Asked Questions

Does unincorporated Florence County have a downtown design code?
Not a downtown-specific one. Its closest equivalent is the Corridor Overlay District in Chapter 30, Division 7, adopted by Ord. No. 21-2023/24, which layers building material, color, and site-design standards on top of the base zoning along designated corridor roadways, not a defined downtown boundary.
What building materials are banned under the corridor overlay?
County Code § 30-79.3(a) prohibits unfinished concrete block masonry and plain corrugated or sheet metal ('sinewave') siding on every exterior building face; decorative styles like box-rib or B-deck corrugated metal remain allowed as accent material in residential and mixed-use districts.
Are bright building colors allowed in the corridor overlay?
No. Section 30-79.3(b)(1) requires subtle, neutral, earth-tone, or historically appropriate building colors and expressly prohibits luminescent, sparkling, reflective, fluorescent, and intense colors, with metal surfaces required to be brushed-finish or painted in muted tones.

Sources & Official References

Other rules in Florence County

All Florence County rules

Compare Florence County to another location·View the South Carolina zoning overlays & bonuses overview

Get notified when Downtown Design Guide in Florence County, SC changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.