Greece, NY Building Safety: Electrical Permits (2026)
Key Facts
- Governing code
- National Electrical Code, § 97-4
- Adopted via
- NY State Uniform Fire Prevention and Building Code
- Inspector minimum experience
- 4,000-8,000 hours as electrician, § 97-6
- Required before energizing
- Temporary certificate of compliance, § 97-10
- Penalty
- Up to $250 fine or 15 days jail, § 97-11
Summary
All electrical wiring installed, altered or repaired in the Town of Greece for light, heat, power or signal systems must conform to the National Electrical Code as adopted in the New York State Uniform Fire Prevention and Building Code, and must be inspected by a Town-licensed electrical inspector before service is connected.
All electrical installations, alterations or repairs of wiring for electric light, heat or power and signal systems hereafter made in or on real property in the Town of Greece shall be made in conformity with the requirements of the National Electrical Code, as cited in the New York State Uniform Fire Prevention and Building Code, and as from time to time amended by the National Fire Protection Association, except where the provisions of this chapter or any other law, ordinance or Building Code of the Town of Greece shall differently prescribe, in which event compliance with the provisions of such law, ordinance or Building Code shall be recognized as proper compliance with this chapter.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4702072; v22 updated 2025-08-21; through 08-21-2025).
Full Breakdown
Section 97-4 requires every electrical installation, alteration or repair of wiring for electric light, heat or power and signal systems in Greece to conform to the National Electrical Code as cited in the New York State Uniform Fire Prevention and Building Code, as amended from time to time by the National Fire Protection Association, unless the Town's own chapter or Building Code sets a different, controlling requirement. The Building Inspector, acting through the Town Clerk, licenses private electrical inspectors under § 97-5 to inspect wiring work, and those inspectors must meet detailed qualification standards in § 97-6, including state authorization, $1,000,000 in personal injury and $5,000,000 excess liability coverage, an office in the Rochester service area staffed at least eight hours a day, and inspectors with a minimum of 4,000 to 8,000 hours of electrician experience.
Under § 97-10, it is a violation to install, alter or repair wiring before filing a written inspection application with the electrical inspector, and a separate violation to connect wiring to any power source before the inspector issues a temporary certificate of compliance. The electrical inspector must report all applications and temporary certificates to the Building Inspector, and must maintain inspection records for at least six years under § 97-6(H).
Violations & Fines
Violating Chapter 97, including wiring without filing an inspection application or energizing wiring before a temporary certificate of compliance issues, is a misdemeanor under § 97-11(A), punishable by a fine up to $250 or imprisonment up to 15 days, or both. Each day a violation continues, and each inspection performed in violation of the chapter, counts as a separate offense, and the Town may also seek an injunction to compel compliance under § 97-11(B).
Frequently Asked Questions
What electrical code applies to wiring work in Greece, NY?
Can I turn on power to new wiring before it's inspected in Greece?
What's the penalty for unpermitted electrical work in Greece?
Sources & Official References
Other rules in Greece
New York rules heatmap·Compare Greece to another location·View the New York building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Electrical Permits in Nearby Cities
How other cities in Monroe County handle electrical permits.