North Hempstead, NY Building Safety: Electrical Permits (2026)
Key Facts
- Governing section
- Code § 2-63
- Licensing body
- Examining Board of Electricians
- Adopted standard
- National Electrical Code
- Final inspection required
- § 2-70A, before use
- First-offense fine
- $500-$5,000 or 15 days
Summary
North Hempstead requires all electrical wiring and equipment to be installed by, or under the supervision of, a licensed master or employing electrician under § 2-63, with narrow exceptions for public utility and government employees. Section 2-70 adopts the National Electrical Code as the binding standard, and no wiring may be energized without a final inspection and certificate of compliance.
All electrical wiring and equipment in the Town of North Hempstead shall be installed, altered or removed by or under the supervision of an employing or master electrician holding a certificate of competency or license issued in accordance with the provisions of this code, except that an electrician or helper employed by the State of New York or any political subdivision thereof, or an electrician or helper employed by any public utility company subject to the jurisdiction of the Public Service Commission or the State of New York may install, remove or alter electric wiring and equipment without a license. ... Standards. Electrical wiring, equipment, apparatus, fixtures and appliances installed, altered or removed pursuant to this article shall be in strict conformity with the provisions thereof, the National Electrical Code and the statutes of the State of New York, as well as approved methods of construction for safety to life and property.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4892187; v82 updated 2026-04-21; through 04-21-2026).
Full Breakdown
Section 2-63A requires that "all electrical wiring and equipment in the Town of North Hempstead shall be installed, altered or removed by or under the supervision of an employing or master electrician holding a certificate of competency or license issued in accordance with the provisions of this code," exempting only electricians and helpers employed by New York State, a political subdivision, or a Public Service Commission-regulated utility while working in that capacity. " Before any wiring, equipment, apparatus, or fixture may be placed in use, § 2-70A requires a final inspection and a certificate of compliance from an inspection agency the Examining Board of Electricians has certified and approved, at the property owner's or electrician's expense rather than the Town's.
2 layers on additional local specifications on top of the National Electrical Code: armored cable for commercial power and lighting, a ban on aluminum wire smaller than 2 AWG, metallic tubing or armored cable for boiler circuits rated 90 degrees Celsius or higher, and licensed-electrician-only work on swimming pool, spa, and main service wiring, with rough wiring verified by an approved inspection agency before walls, floors, or ceilings are closed up.
Violations & Fines
Unlicensed electrical work, or wiring placed into use without the required final inspection and certificate of compliance under § 2-70A, is punishable under the Chapter 2 penalty at § 2-75: a fine of $500 to $5,000 or up to 15 days in jail for a first offense, and $5,000 to $10,000 for a repeat offense.
Frequently Asked Questions
Do I need a licensed electrician for wiring work in North Hempstead?
Does North Hempstead follow the National Electrical Code?
Can new wiring be used before it is inspected?
Sources & Official References
Other rules in North Hempstead
New York rules heatmap·Compare North Hempstead to another location·View the New York building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.