Skip to main content
CityRuleLookup

Brevard County, FL Building Setbacks & Zoning: Lot Coverage Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Max coverage, attached/multi-family/RP zones
40 percent of lot area
Governing sections
§§ 62-1343, 62-1344, 62-1371, 62-1372
Detached single-family zones (EU, RU-1 series)
No numeric coverage cap
Scope
Unincorporated Brevard only
Penalty
Up to $500 fine or 60 days jail

Summary

Brevard County caps building lot coverage at 40 percent in its attached single-family, multi-family and residential-professional zoning classifications; conventional single-family lots (EU, RU-1-7, RU-1-9, RU-1-11, RU-1-13) carry no percentage cap and are controlled by setbacks and minimum lot size instead.

City-specific rules exist: Titusville, Melbourne, Palm Bay, and Cocoa have their own lot coverage limits rules that differ from Brevard County's county-level regulations. If you live in one of those cities, check the city-specific page instead.

(4)Lot requirements.a.Minimum lot size is 7,500 square feet.b.Minimum lot width is 75 feet.c.Minimum lot depth is 75 feet.d.Maximum density is as follows:1.RU-2-4: Four units per gross acre.2.RU-2-6: Six units per gross acre.3.RU-2-8: Eight units per gross acre. ... e.Maximum lot coverage is 40 percent.

Source: Brevard County Code of Ordinances (Municode)View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 135).

Full Breakdown

Section 62-1371 sets a hard 40 percent maximum lot coverage for RU-2-4, RU-2-6 and RU-2-8 multi-family lots, and the same 40 percent ceiling repeats in the RA-2 single-family attached classifications (§ 62-1343), the RP residential-professional classification (§ 62-1344), and the RU-2-10/12/15 classifications (§ 62-1372). Standard detached single-family zones, EU, EU-1, EU-2, RU-1-7, RU-1-9, RU-1-11 and RU-1-13, set no percentage cap at all; bulk is controlled instead through minimum lot size, setbacks and building height. These rules govern unincorporated Brevard only, Cocoa, Titusville, Melbourne, Palm Bay and the county's other cities enforce their own zoning codes.

Violations & Fines

Building or using a structure that exceeds the coverage limit is a code violation punishable by up to a $500 fine or 60 days in jail per day, plus injunctive action under § 62-1106.

Frequently Asked Questions

Does Brevard County cap lot coverage for a standard single-family home?
No. Detached single-family classifications like RU-1-9 and EU set no lot-coverage percentage; the county controls bulk through minimum lot size, setbacks and a 35-foot height limit instead.
What's the lot coverage limit for a townhome or multi-family lot in unincorporated Brevard?
40 percent of the lot area under §§ 62-1343, 62-1344, 62-1371 and 62-1372, covering RA-2 attached, RP and RU-2 multi-family classifications.
Does this rule apply inside Cocoa or Titusville?
No. Those cities and Brevard's other municipalities enforce their own zoning codes; the county code cited here governs only unincorporated Brevard.

Sources & Official References

Other rules in Brevard County

All Brevard County rules

Florida rules heatmap·Compare Brevard County to another location·View the Florida building setbacks & zoning overview

Get notified when Lot Coverage Limits in Brevard County, FL changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Lot Coverage Limits in Cities Across Brevard County