Fence Regulations in Alpharetta, GA (2026)
4 verified fence regulations for Alpharetta, Georgia, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Fences and walls in the City of Alpharetta cannot exceed 6 feet on residential property or 8 feet on non-residential property under Unified Development Code Section 2.3.6.A, with up to a 50% increase allowed on sloped lots to keep an even fence line. Near intersections, Section 2.3.6.B caps fences, walls, shrubbery and hedges at 3 feet within 20 feet of a street corner.
Alpharetta Fence Height and Corner Rules
Some RestrictionsAlpharetta Unified Development Code § 2.3.6.A-B
A.Height. Height of fences and walls used as fences shall not exceed six (6) feet on residential property and eight (8) feet on non residential property. These limits may be exceeded by up to 50% on sloped lots where the appearance of an even fence line is desired.B.Location on Property. In order to prevent the obstruction of visibility, no walls, fences, shrubbery or hedges over three (3) feet...
Fence Permit Requirements
Alpharetta does not require a permit to build a fence or wall that meets the Unified Development Code's height, location and material standards under Section 2.3.6.E. A permit is triggered only if the fence incorporates signage, which needs a separate sign permit regardless of the fence's other dimensions.
Alpharetta Fence Permit Requirements
Light RestrictionsAlpharetta Unified Development Code § 2.3.6.E
E.Permit. A permit for construction shall not be required to erect a fence or wall used as a fence which is built in accordance with these standards. Signage incorporated into such fences shall require a sign permit.
Retaining Walls
Alpharetta exempts retaining walls under 4 feet tall from a permit, but walls over 4 feet must be built to City standard drawings or be engineered, and any wall over 6 feet needs a continuous safety barrier at the top.
Alpharetta Retaining Wall Height and Permit Rules
Some RestrictionsAlpharetta Unified Development Code § 4.4.5
Exception No. 2: ... 1.Retaining walls which do not exceed 4 feet in vertical height, as measured from the low side exposed toe of the wall to the top of the wall at any point. ... I.Site Retaining Walls.1.Site retaining walls, whether attached or detached from buildings or not, which are over four feet (4′) in height at any point along the wall, as measured from the exposed low side toe of the...
Material Restrictions
The City of Alpharetta limits residential fence materials to wood, metal, brick, block, vinyl or stone under Unified Development Code Section 2.3.6.C, and bans plywood or sheet-goods fencing outright. Barbed wire, razor wire and electrically charged fencing are allowed only in the AG and RE districts, and need administrative review and approval anywhere else.
Alpharetta Fence Material Restrictions
Significant RestrictionsAlpharetta Unified Development Code § 2.3.6.C
C.Materials. Fences and walls used as fences shall be made of wood which shall be protected from decay by the use of naturally durable wood or wood that is pressure treated, metal, brick, block, vinyl or stone. The use of plywood/sheet goods as a material is prohibited. Barbed, razor wire or electrically charged fencing shall be permitted in AG and RE districts and may be permitted, subject to ...
Looking for Fulton County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Alpharetta city rules.
Fence Regulations in Fulton County →