Outdoor Lighting in Burleson, TX (2026)
3 verified outdoor lighting rules for Burleson, Texas, sourced directly from the municipal code and official government pages.
Verified from official government sources
Dark Sky Rules
In the City of Burleson, Texas, exterior lighting on properties under the IH-35 Design Standards must use fully shielded, full cut off fixtures for street and path lighting, parking lots, parks, plazas, billboards, display areas, and building façades, overhangs and canopies. Swapping fixtures after approval must meet the same standard.
Burleson IH-35 Corridor Shielded Lighting Rules
Some RestrictionsBurleson Code of Ordinances, Appendix C, Article V, § 5-55
§ 5-55. Lighting. ... All exterior lighting fixtures shall comply with the following standards: (a) Fully shielded and full cut off light fixtures are required for: (1) Street, sidewalk and path lighting. (2) Parking lots. (3) Recreational areas, parks, plazas and other public spaces. (4) Billboards. (5) Display areas. (6) Building façades, overhangs and canopies. (b) Directional lights may be ...
Light Trespass & Shielding
In the City of Burleson, Texas, multi-family developments cannot let light trespass onto adjacent private parcels, and the light source itself cannot be visible at the property line. Fixtures need cut off lenses or shields, and building lights must aim at the building or the ground next to it.
Burleson Multi-Family Light Trespass Rules
Some RestrictionsBurleson Code of Ordinances, Appendix C, Article VIII, § 8-44
§ 8-44. Lighting. ... (a) Energy efficiency, color rendition, safety, security, and overall effect shall be considered for overall project lighting design. The following shall be required: (i) Lighting sources shall have cut off lenses and/or shields and shall be located to avoid light spillage and glare on adjacent properties and in private spaces. (ii) Lighting shall not be permitted to tresp...
Billboard Lighting
Digital billboards in the City of Burleson, Texas cannot operate at brightness levels of more than 0.3 footcandles above ambient light, measured with a footcandle meter at a pre-set distance. Section 63-55(d) also requires a light sensing device that adjusts brightness as ambient light changes, and upward shielding so beams are not directed at a traveled roadway or an occupied residential area.
Billboard Lighting and Brightness in Burleson
Some RestrictionsBurleson Code of Ordinances § 63-55
§ 63-55. Permanent off-premises signs (billboard). ... (d) Illumination. (1) Signs shall be shielded upward to prevent beams or rays from being directed at any portion of a traveled roadway or an occupied residential area and shall not be of such intensity or brilliance as to cause glare or impair vision. ... (2) Each display must have a light sensing device that will adjust the brightness as a...