Jurupa Valley, CA Swimming Pools & Spas: Fencing Requirements (2026)

California has occupied the field of residential pool barriers, so Jurupa Valley defers to state law. Health & Safety Code §115923 lists the specific construction standards: (1) minimum 60-inch height measured from the outside; (2) maximum 2-inch vertical clearance from the ground to the bottom of the enclosure; (3) gaps or voids cannot allow passage of a 4-inch-diameter sphere (this controls picket spacing and chain-link mesh); (4) the outside surface must be free of protrusions, cavities, or other physical characteristics that could serve as climbable handholds/footholds for a child under five (this disqualifies most ladder-rung styles and horizontal rails on the pool side of the fence); and (5) access gates must open away from the pool and be self-closing with a self-latching device set no lower than 60 inches above the ground. If the house wall forms part of the enclosure, the doors providing direct pool access need a self-closing/self-latching device at 54 in. or higher OR an audible exit alarm — that's the H&S §115922(d)/(e) requirement. Removable mesh fencing under ASTM F2286 paired with a key-lockable self-closing gate is also accepted under §115922(b). Within Title 9 zoning, fences around pools still count against the perimeter fence height limits — typically 6 ft in rear/side yards — and pool-equipment screening is treated like any other accessory equipment.