Port Orange, FL Trash & Recycling: Dumpster Rules (2026)
Key Facts
- Commercial ratio
- 1 pad/7,500 sq ft retail, 1/10,000 sq ft office
- Industrial ratio
- 1/10,000 sq ft office-mfg, 1/30,000 sq ft warehouse
- Multifamily ratio
- 1 pad per 20 units, or a compactor
- Max backing distance
- 100 feet for the collection truck
- Turning radius
- 35-foot inside radius, fully paved
- Adopted by
- Ord. No. 2011-27, § 6, eff. 10-25-11
Summary
Port Orange's Land Development Code requires every commercial, industrial, multifamily and institutional project to install dumpster pads sized to its use, with retail development providing one pad per 7,500 square feet and industrial buildings scaling by office, manufacturing and warehouse space, then sets strict placement, access and enclosure standards for every pad.
Section 7: - Solid waste collection service.(a)Minimum service requirements. All townhouse, multifamily, commercial, and industrial development shall provide facilities for service as follows: ... (2)Commercial developments shall provide one standard dumpster pad for every 7,500 square feet of retail space and every 10,000 square feet of office space.(3)Industrial developments shall provide one standard dumpster pad for every 10,000 square feet of office or manufacturing space, and one standard dumpster pad for every 30,000 square feet of warehouse space. ... (b)Solid waste facility design. ... (1)Accessibility. Dumpster pad locations shall be designed to accommodate front loading trucks. No dumpster shall be located so as to require the truck to back up a distance of more than 100 feet. ... All drives that provide access to dumpsters must be able to accommodate a 35-foot inside turning radius totally within the paved area. ... (3)Enclosure. Each dumpster location shall be surrounded by an enclosure as depicted in the Standard [Utility] Details.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 43 | Land Development Code: Supplement 38).
Full Breakdown
The city's minimum service requirements scale by use. Townhouse and multifamily projects need one standard dumpster pad and enclosed collection point for every 20 residential units, or a trash compactor sized for the whole development; projects under 20 units are exempt. Commercial developments provide one standard pad for every 7,500 square feet of retail space and every 10,000 square feet of office space. Industrial developments need one pad per 10,000 square feet of office or manufacturing space and one per 30,000 square feet of warehouse space, while institutional buildings meet whichever combination of these ratios matches their actual use. These figures are minimums built around twice-a-week pickup; if that is not enough for a site's real trash volume, the city can order more facilities or a switch to more frequent service.
Placement and design rules follow in the same section. Dumpster pads must be designed for front-loading trucks, and no dumpster can be sited so a truck has to back up more than 100 feet to reach it. Access drives need a 35-foot inside turning radius entirely within paved area, and pads should generally sit at a 45-degree angle or less from access drives, except at intersections where 90-degree access is allowed. Every dumpster location must be surrounded by an enclosure built with colors, materials and architectural treatments matching the building it serves, left open on the service side except where gates are approved for high-visibility sites. These siting standards trace to Ordinance No. 2011-27, Section 6, effective October 25, 2011, and sit alongside, but separate from, the city's general solid waste collection operating rules in Code of Ordinances Chapter 56.
Violations & Fines
A shortfall in dumpster capacity for the assumed twice-weekly pickup schedule is not treated as a standalone fine: Section 7(a)(5) instead lets the city order construction of additional pads or a switch to more frequent collection at the property owner's expense. An enclosure, backing distance or turning radius that does not meet these placement standards is flagged as a site plan deficiency during development review, which holds up certificate-of-occupancy approval until the design is corrected.
Frequently Asked Questions
How many dumpster pads does a Port Orange commercial building need?
How far can a dumpster truck back up on a Port Orange site?
Does a commercial dumpster have to be screened from view in Port Orange?
Sources & Official References
Other rules in Port Orange
Florida rules heatmap·Compare Port Orange to another location·View the Florida trash & recycling overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Dumpster Rules in Nearby Cities
How other cities in Volusia County handle dumpster rules.