Skip to main content
CityRuleLookup

Moore, OK Building Safety: Plumbing Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Code adopted
2018 International Plumbing Code (§ 5-301)
Permit trigger
Required per city plumbing code (§ 5-113)
Administrator
Plumbing official is building official or designee
Stop-work power
Authorized under Section 108.5
Backflow rule
Backwater valves required at sewer junction
Penalty
Up to $500 plus license revocation (§ 5-306)

Summary

In the City of Moore, Oklahoma, the city has adopted the 2018 International Plumbing Code, as amended by the Oklahoma uniform building code commission, to govern plumbing work, and Sec 5-113 requires anyone doing plumbing work to obtain a permit under that adopted code before starting. The plumbing official, who is the building official or a designee, administers and enforces the chapter.

Pursuant to section 2-15 of the Charter, the council may by ordinance adopt, by reference, codes which shall be considered to have the same effect as if set out in full in this Code. Pursuant to this authority, the city council hereby ordains that a certain document, at least one copy of which is on file in the office of the city clerk, being marked and designated as "The International Plumbing Code , 2018 edition" as amended and modified by the Oklahoma uniform building code commission pursuant to 59 O.S. § 1000.23, is hereby adopted as the plumbing code of the city; for the control of buildings and structures as herein provided, referred to herein as the "plumbing code" or "IPC" Each and all of the regulations, provisions, penalties, conditions and terms of the International Plumbing Code are hereby referred to, adopted and made a part hereof, as if fully set out in this Code, with the additions, insertions, and changes, if any, as prescribed and set out herein.

Full Breakdown

Sec 5-301 adopts, by reference under Section 2-15 of the city charter, The International Plumbing Code, 2018 edition, as amended and modified by the Oklahoma uniform building code commission under 59 O.S. § 1000.23, with a copy on file at the city clerk's office; every regulation, provision, penalty and condition of that code is adopted as if fully written into the city's own code. Sec 5-302 lists the local amendments layered onto the 2018 IPC, including inserting the City of Moore's name into Section 101.1, adding a new water-line-repair exemption to the permit-exempt list in Section 106.6.2, requiring backwater valves at the building drain-to-sewer junction under Section 714.1, and rewriting Section 108.5 so the code official can issue a written stop-work order whenever plumbing work is performed contrary to the code or in a dangerous or unsafe manner.

Sec 5-113 supplies the actual permit trigger for plumbing work specifically, requiring that plumbing permits be obtained in accordance with the terms of the city's plumbing code, and Sec 5-115 folds every plumbing permit and inspection fee into the council-adopted fee schedule on file with the city clerk. Sec 5-303 places administration and enforcement of the whole plumbing chapter in the hands of the plumbing official, who is the building official or a designee unless the council appoints someone else, and Sec 5-307 creates a five-member Plumbing Committee, four of them licensed plumbing contractors, journeymen or engineers, to review proposed code adoptions.

Violations & Fines

Sec 5-306 makes any violation of the plumbing chapter an offense punishable under the general Sec 1-108 penalty, up to $500 and a possible revocation of the plumber's license, and treats each day a violation continues as a separate offense. Continuing plumbing work after the code official issues a Section 108.5 stop-work order, except to correct the cited violation, exposes the person to further penalty under that same section.

Frequently Asked Questions

What plumbing code does Moore, Oklahoma use?
The city has adopted the 2018 International Plumbing Code by reference under Sec 5-301, as amended and modified by the Oklahoma uniform building code commission, and layered its own local amendments onto it in Sec 5-302, covering everything from permit exemptions to backwater valve placement.
Who enforces Moore's plumbing code?
Sec 5-303 makes the plumbing official responsible for administering and enforcing the plumbing chapter, and that official is the building official or a designee unless the city council appoints someone else. The official can also issue a written stop-work order under Section 108.5 for unsafe or noncompliant work.
What happens if I keep working after a plumbing stop-work order in Moore?
Section 108.5 authorizes the code official to halt work that is contrary to the plumbing code or dangerous, and continuing anyway, aside from work needed to fix the violation, exposes the person to the penalties in Sec 5-306, which allows a fine under Sec 1-108 and revocation of the plumber's license.

Sources & Official References

Other rules in Moore

All Moore rules

Compare Moore to another location·View the Oklahoma building safety overview

Get notified when Plumbing Permits in Moore, OK changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Plumbing Permits in Nearby Cities

How other cities in this county handle plumbing permits.

Norman, OK
Some Restrictions