Fence Regulations in Gulfport, FL (2026)
4 verified fence regulations for Gulfport, Florida, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
In Gulfport residential districts, Sec. 7-3(g) caps fences at six feet behind the front setback line and four feet in front of the main structure. A visibility triangle at street, alley and driveway intersections limits anything to two feet high, with sides of twenty-five or ten feet depending on the intersection type.
Gulfport Residential Fence Height Limits
Some RestrictionsGulfport Code of Ordinances § 7-3(g)
(g)Residential districts (including all districts used or zoned for residential purposes):(1)Fences may be constructed up to six (6) feet in height along the boundary of a lot on that portion line behind the front setback line and behind the front of the main structure. Interior lots that are immediately adjacent to a corner lot may erect a six-foot high fence forward of the front setback line ...
Fence Permit Requirements
Gulfport requires a permit before building any fence. Sec. 7-3(a) makes anyone wanting to construct a fence disclose the height, material, contractor and location relative to property lines on a city permit form, and construction cannot begin until the city issues that permit.
Gulfport Fence Permit Requirement
Some RestrictionsGulfport Code of Ordinances § 7-3(a)
(a)Permit required. Any person desiring to construct or to have constructed any fence within the city shall disclose such information as is required upon a permit form to be supplied by the city, including but not limited to:(1)Height and material of fence.(2)Location of fence in relationship to the property boundary lines.(3)Name of contractor, if applicable.(4)Any other information deemed nec...
Retaining Walls
Gulfport's only retaining-wall standard sits in the seawall chapter: Sec. 6-38 requires seawalls, bulkheads and retaining walls to be concrete construction meeting detailed engineering minimums, including a 3,000 psi concrete strength and a cap elevation at least three and a half feet above mean high tide.
Gulfport Seawall and Retaining Wall Standards
Some RestrictionsGulfport Code of Ordinances § 6-38
All seawalls, bulkheads and retaining walls constructed or altered shall be of concrete construction in compliance with the following minimum standards: (1)All seawalls and bulkheads shall be of concrete, utilizing the tongue and groove sheet pile type construction, with poured in place concrete cap and tie back anchors. The concrete shall have a minimum test strength of 3,000 psi at 28 days an...
Material Restrictions
Gulfport bans barbed wire fencing citywide except in C-1 and C-2 business districts, and bans electrified fences in every zoning district with no exception. Sec. 7-3(e)-(f) sets the ban; Sec. 7-3.1(a) then limits even the commercial-district barbed wire allowance to three strands starting at 6.5 feet.
Gulfport Barbed Wire and Electric Fence Ban
Significant RestrictionsGulfport Code of Ordinances §§ 7-3(e)-(f), 7-3.1(a)
(e)Barbed wire. Barbed wire for fence purposes is excluded from all zoning districts except as permitted in C-1 or C-2 business districts.(f)Electrified fences. No electrified fence shall be erected in any district. ... (a)C-1 and C-2 business districts. Fences in the business district will be a minimum of six (6) feet in height and a maximum of eight (8) feet in height and may be topped with b...
Looking for Pinellas County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Gulfport city rules.
Fence Regulations in Pinellas County →