Fence Regulations in Pico Rivera, CA (2026)
4 verified fence regulations for Pico Rivera, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
In the City of Pico Rivera, Municipal Code Table 18.18.020.A caps front-setback fences at 4.5 feet if non-view-obscuring or 3.5 feet if view-obscuring, while fences beyond the front setback may reach 7 feet (10 feet in industrial zones). Columns or pilasters can rise to 4.5 feet if set back at least 10 feet from a driveway edge. Community and Economic Development enforces the table citywide.
Pico Rivera Fence Height Limits by Setback
Some RestrictionsPico Rivera Municipal Code § 18.18.020(B)
Table 18.18.020.A Fences, Walls, and Hedges Fence, Wall, or Hedge Height Setback Reference Within the Front Setback Non-view-obscuring fence, wall, or hedge Max. 4.5 feet N/A ... View-obscuring fence, wall, or hedge Max. 3.5 feet N/A ... Beyond the Front Setback Any fence, wall, or hedge Max. 7 feet Max. 10 feet industrial zones only Min. 10 feet from edge of driveway At Driveways and Intersect...
Fence Permit Requirements
In the City of Pico Rivera, a subdivider who relinquishes or dedicates access rights along a street or highway must build a masonry wall at least six feet tall along the property line of the abutting lots, unless those lots instead front the street from a dedicated alley. Municipal Code Section 17.32.190 requires a building permit for that wall's erection and construction, and citywide fence standards in Section 18.18.020 govern it once built.
Pico Rivera Subdivision Boundary Wall Permit
Some RestrictionsPico Rivera Municipal Code § 17.32.190
§ 17.32.190. Fences or walls adjacent to highways. If lots in a division of land abut a street or highway and the subdivider has relinquished or dedicated access rights to such street or highway, a masonry wall not less than six feet in height shall be required to be installed and constructed along the property line of the lots contiguous to the street or highway, unless such lots are designed ...
Retaining Walls
In the City of Pico Rivera, a retaining wall four feet or less in height, measured from the bottom of the footing to the top of the wall, does not need a building permit, but any taller wall, or any wall supporting a surcharge or impounding hazardous liquids, requires a permit and engineered plans.
Pico Rivera Retaining Wall Height and Permit Rule
Some RestrictionsPico Rivera Municipal Code § 15.08.020 (CBC § 105.2)
Retaining walls that are not over 4 feet (1,219 mm) in height measured from the bottom of the footing to the top of the wall, unless supporting a surcharge or impounding Class I, II or IIIA liquids.
Material Restrictions
In the City of Pico Rivera, Municipal Code Section 18.18.020(C) bans chain-link fencing within front and side street setbacks and prohibits corrugated metal or plastic fencing anywhere on the lot. Razor wire, barbed wire and electrified fencing are barred citywide except where the Zoning Administrator approves them for security in industrial zones.
Pico Rivera Fence Material Restrictions
Some RestrictionsPico Rivera Municipal Code § 18.18.020(C)(2)-(4)
Permitted fence and wall materials and finishes shall include concrete, concrete block, brick, stone, wood, metal (such as wrought iron or tube steel), vinyl, or similar material that resembles wood or masonry. ... Fences or walls constructed of chain-link shall be prohibited within the front and side street setback. Corrugated metal or plastic shall be prohibited throughout. ... Fences or wall...
Looking for Los Angeles County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Pico Rivera city rules.
Fence Regulations in Los Angeles County →