Building Safety in Spalding County, GA (2026)
4 rules for unincorporated Spalding County, Georgia.
Verified from official government sources
Building Permits
Any construction, enlargement, repair, move, demolition, or change of occupancy involving a building or structure in unincorporated Spalding County requires a permit from the Department of Community Development under Code § 8-1006(1)(a), and the same rule covers electrical, gas, mechanical, and plumbing work. The county carves out only ordinary minor repairs valued under twenty-five hundred dollars, plus a short list of specific exemptions listed elsewhere in the section.
Spalding County Building Permit Requirement
Some RestrictionsSpalding County Code § 8-1006(1)(a), (1)(c)
(a)When required. Any owner, authorized agent, or contractor who desires to construct, enlarge, later, repair, move, demolish, or change the occupancy of a building or structure, or to erect, install, enlarge, alter, repair, remove, convert, or replace any electrical, gas, mechanical, or plumbing system, the installation of which is regulated by the construction codes, or to cause any such work...
Electrical Permits
Sec. 8-1001 of the Spalding County Code adopts the latest Georgia-amended edition of the National Electrical Code as a Construction Code, and Sec. 8-1006 requires anyone who wants to erect, install, alter, repair, or replace an electrical system to first get a permit from the department of community development, with limited exemptions for minor repairs.
Electrical Permits, Unincorporated Spalding County
Some RestrictionsSpalding County Code §§ 8-1001, 8-1006
(1)Spalding County hereby adopts the State Minimum Codes ("Construction Codes") as set out in O.C.G.A. § 8-2-20(9). ... (e)National Electrical Code. ... (1)Permit application.(a)When required. Any owner, authorized agent, or contractor who desires to ... erect, install, enlarge, alter, repair, remove, convert, or replace any electrical, gas, mechanical, or plumbing system, the installation of w...
Plumbing Permits
Sec. 8-1001 of the Spalding County Code adopts the latest Georgia-amended edition of the International Plumbing Code as a Construction Code, and Sec. 8-1006 requires a permit from the department of community development before installing, altering, or replacing a plumbing system, with a narrow exemption for stopping leaks and clearing stoppages.
Plumbing Permits, Unincorporated Spalding County
Some RestrictionsSpalding County Code §§ 8-1001, 8-1006
(1)Spalding County hereby adopts the State Minimum Codes ("Construction Codes") as set out in O.C.G.A. § 8-2-20(9). ... (d)International Plumbing Code. ... (1)Permit application.(a)When required. Any owner, authorized agent, or contractor who desires to ... erect, install, enlarge, alter, repair, remove, convert, or replace any electrical, gas, mechanical, or plumbing system, the installation o...
Building Inspections
Once a building permit is issued in unincorporated Spalding County, the building officer inspects the work at intervals throughout construction and again at completion, under Code § 8-1006(8). A contractor cannot move past the point marked by one inspection to the next phase of work without first getting a written release from the Department of Community Development, and a final inspection is required before any certificate of occupancy or completion is issued.
Spalding County Building Inspection Stages
Some RestrictionsSpalding County Code § 8-1006(8)(a), (8)(d), (8)(g)
(8)Inspections.(a)Existing building inspections. ... They shall inspect all buildings, structures, electrical, gas, mechanical, and plumbing systems, from time to time, during and upon completion of the work for which a permit was issued. ... (d)Inspections prior to issuance of certificate of occupancy or completion. The building officer shall inspect or cause to be inspected at various interva...
All Spalding County ordinances
See every category we cover for Spalding County: parking, noise, fences, fires, animals, pools, and more.
Spalding County Ordinance Hub →