Skip to main content
CityRuleLookup

Grand Prairie, TX Fence Regulations: Height Limits (2026)

Light Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Permit
Required for all fences
Approved Materials
Wood, masonry, chain link, wrought iron
Prohibited
R-panel, metal, plywood
Maintenance
Free from blight required

Summary

Grand Prairie requires permits for all new fences and replacements. Approved materials: wood, masonry, chain link, wood slats, wrought iron. Prohibited: R-panel, metal sheeting, plywood. Fences must be free from blight and deterioration.

Sec. 143.028. FENCES. (a) A person is not required to fence against animals that are not permitted to run at large. Except as otherwise provided by this section, a fence is sufficient for purposes of this chapter if it is sufficient to keep out ordinary livestock permitted to run at large.(b) In order to be sufficient, a fence must be at least four feet high and comply with the following requirements:(1) a barbed wire fence must consist of three wires on posts no more than 30 feet apart, with one or more stays between every two posts;(2) a picket fence must consist of pickets that are not more than six inches apart;(3) a board fence must consist of three boards not less than five inches wide and one inch thick; and(4) a rail fence must consist of four rails.(c) The freeholders o

Source: City of GP - Residential FencingView official code

Full Breakdown

The City of Grand Prairie requires an approved permit from the Building Inspections Division for all fence replacements and new fence installations. Approved residential fencing materials include wood, masonry, chain link, wood slats, and wrought iron. Prohibited materials include R-panel, metal sheeting, and plywood. All fences must be maintained in good condition, free from blight or deterioration, per the code compliance standards in Chapter 29. The Unified Development Code contains additional requirements for screening fences in specific zoning districts. A Type 1 or Type 2 screening fence at least 6 feet in height is required on sides of certain uses not abutting public streets.

Violations & Fines

Building without a permit: stop work order and fine. Deteriorated fences: code compliance citation. Fine per Section 1-8.

Frequently Asked Questions

What fence materials are allowed in Grand Prairie?
Wood, masonry, chain link, wood slats, and wrought iron. R-panel, metal sheeting, and plywood are prohibited.
Do I need a permit for a fence in Grand Prairie?
Yes. All new fences and replacements require a permit from the Building Inspections Division.

Sources & Official References

Other rules in Grand Prairie

All Grand Prairie rules

How Grand Prairie compares: Cities That Allow the Tallest Residential Fences·Texas rules heatmap·Compare Grand Prairie to another location·View the Texas fence regulations overview

Get notified when Height Limits in Grand Prairie, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Height Limits in Nearby Cities

How other cities in Dallas County handle height limits.

Garland, TX
Light Restrictions
Mesquite, TX
Light Restrictions
Dallas, TX
Light Restrictions
Carrollton, TX
Some Restrictions
Irving, TX
Some Restrictions
Richardson, TX
Some Restrictions
Cedar Hill, TX
Some Restrictions