Chandler, AZ Sign Regulations: Window Signs (2026)
Key Facts
- Coverage limit
- 25% of window area per side
- Permit
- Not required (Sec. 39-7.2(G))
- Counts toward total sign area
- No: excluded
- Enforcing office
- Zoning Administrator, Planning Division
- Correction window (temporary)
- 3 working days (Sec. 39-6.4(C))
Summary
Chandler's Sign Code lets businesses paint or post signs on window glass without a permit, but coverage can't exceed 25 percent of the total window area on any one side of the building. Window signage also doesn't count toward the property's overall allowed sign area, making it a free add-on within that limit.
Window signs may be painted on or otherwise displayed from the surface of any window, showcase or other similar facility. The area of such signs shall not exceed twenty-five (25) percent of the total window area on any one side of a building as illustrated in Figure 9.14-A. The area of said sign shall not be included in the total allowed sign area.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 79).
Full Breakdown
14 of the Chandler Sign Code governs window signs, any sign painted on or adhered to the interior or exterior of a glass door or window, or placed inside a window and visible from outside, per the 'Sign, window' definition in Section 39-3. ' Coverage is measured per building side, so a corner tenant with street-facing glass on two elevations gets a 25 percent allowance on each side separately. Because the code adds that 'the area of said sign shall not be included in the total allowed sign area,' a business already at its wall- and freestanding-sign maximum under Section 39-9 can still add window graphics on top, up to the quarter-glass limit.
2(G), so the Zoning Administrator's Planning Division does not require an application, fee or plan review before a business installs window lettering, decals or painted glass, a real savings compared with permanent wall or freestanding signs, which need structural and electrical plan review under Chapter 29. The exemption is narrow: it covers only signage on or in the window itself. A separately illuminated or projecting window-mounted display can fall under the wall-sign or cabinet-sign definitions instead, which do count toward the site's total allowed sign area and do require a permit.
Violations & Fines
Exceeding the 25 percent window-coverage limit makes the display an illegal sign under Section 39-6.4. The Zoning Administrator must give written notice describing the excess coverage; a temporary window display gets three working days to correct or remove it, a permanent installation gets thirty days, and re-posting the same oversized graphic afterward counts as a continuing violation subject to further enforcement.
Frequently Asked Questions
Can I cover my whole storefront window with signage in Chandler?
Do I need a permit for a window sign in Chandler?
Does window signage count against my building's total sign allowance?
Sources & Official References
Other rules in Chandler
Compare Chandler to another location·View the Arizona sign regulations overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Window Signs in Nearby Cities
How other cities in Maricopa County handle window signs.