Queen Creek, AZ Sign Regulations: Window Signs (2026)
Key Facts
- Window sign coverage
- Up to 100% of aggregate window area
- Placement limit
- Street level only, not above first story
- Permit
- No sign permit required, Section 7.2.G
- Interior accent sign
- 1 sign, max 2 sq ft, non-residential only
- Interior sign height
- Not placed higher than 6 feet from grade
- Excluded from interior exemption
- Electronic or static message and reader boards
- First-offense penalty
- $250 civil fine, Section 2.6.H
Summary
Queen Creek allows window signage to cover up to 100% of a storefront's aggregate window area under Section 7.2.G, as long as the signs sit at street level and no higher than the first story, and no permit is required. A separate rule in Section 7.2.A.10 lets non-residential businesses add one small interior accent sign without counting it toward the site's overall sign allowance.
10. Interior Window Signs a. In non-residential zoning districts, businesses may display one (1) nonelectronic or neon sign in window areas only. Such sign shall only be displayed on the interior of a window and shall not count towards the maximum allowed signage, provided the following conditions are met: 1) Maximum area shall not exceed two (2) square feet; ... 4) A sign permit is not required; ... G. ... Window Signs. Up to one-hundred- percent (100%), of aggregate window area, providing that the following criteria are complied with: ... 1. ... Window signage shall be placed on the street level of the building; 2. No window signage is permitted above the first story of the building; and, 3. No sign permit required.
Full Breakdown
The Town of Queen Creek treats window signage as one of the most lightly regulated categories in its Zoning Ordinance. G, Window Signs, allows coverage of up to one-hundred percent (100%) of aggregate window area, making it the only sign type in Article 7 with no percentage cap tied to building frontage. The tradeoff is placement: window signage must be placed on the street level of the building, is barred entirely above the first story, and the section confirms no sign permit is required, so a retailer can fill its ground-floor storefront glass with promotional signage without applying to the Planning Department.
10, Interior Window Signs, gives non-residential businesses a second, smaller allowance that does not count toward the site's overall maximum signage: one non-electronic or neon sign displayed on the interior of a window, capped at two square feet and no higher than six feet from finished grade, again with no permit required. That interior allowance explicitly excludes electronic or static message and reader boards, so an LED window display does not qualify for the exemption and instead falls back to the ordinary window-sign rules, or the Article's animated-sign restrictions if its message changes more than eight times a day. A.
Violations & Fines
Window signs that exceed the 100% aggregate limit, sit above the first story, or an interior accent sign that tops two square feet, are ordinary Article 7 violations, enforced the same as any other sign infraction under Section 2.6.H: a $250 civil penalty for a first offense, $500 for a second offense within twelve months, and $2,000 for a third, with every additional day of non-compliance after a citation treated as a new offense.
Frequently Asked Questions
How much of my storefront window can I cover with signs in Queen Creek?
Can I add an interior sign without it counting against my building's total sign allowance?
Does an electronic window display qualify for the small interior sign exemption?
Sources & Official References
Other rules in Queen Creek
Compare Queen Creek to another location·View the Arizona sign regulations overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Window Signs in Nearby Cities
How other cities in Maricopa County handle window signs.