Glynn County, GA Building Safety: Building Inspections (2026)
Key Facts
- Inspection duty
- Contractor must request each inspection
- Reinspection
- Fee charged for non-compliant work
- Site-plan check
- Staff planner inspects before CO issues
- CO requirement
- All inspections passed, easement deeds filed
- Governing sections
- Zoning Ordinance §§ 623.8, 623.9
Summary
In unincorporated Glynn County, every approved construction project needs periodic inspections during construction, arranged through the Building Inspection Division, and contractors are responsible for requesting their own inspections. Non-compliant work triggers a reinspection fee, and a Certificate of Occupancy cannot issue until all required inspections and, where applicable, a site-plan compliance check are complete.
623.8Construction Inspection Process.(a)All approved construction projects require periodic inspections during the construction process. The type of inspections and when they will be required will be designated on the building permit. Inspections of the infrastructure are performed by the County Engineer's office. All contractors and subcontractors are responsible for requesting their own inspections. ... (c)Reinspections of non-compliant work require payment of reinspection fees. ... 623.9Requirements for Certificate of Occupancy.(a)Satisfactory completion of all required construction inspections and correction of unacceptable work.
Full Breakdown
8, Construction Inspection Process, requires periodic inspections during construction for every approved project, with the specific inspections and their timing designated on the building permit itself; infrastructure inspections are handled by the County Engineer's office. 8(b) puts the burden on the contractor: it is the responsibility of the contractor or others in the contractor's employ to request the required construction inspections at the appropriate times, through the Glynn County Building Inspection Division. 8(d) adds that any project which needed site plan approval also gets inspected by the staff planner for compliance with that approved site plan before the Building Official issues a Certificate of Occupancy.
9 lists what a Certificate of Occupancy actually requires: satisfactory completion of all required inspections and correction of any unacceptable work, record drawings of water, sewer and drainage systems to be deeded to the county, copies of deeds for any required easements, and, for projects needing site plan approval, written notification from the design professional who certifies the installation was field-checked against the approved plan. County staff independently inspects for compliance with the approved building permit, site plan and architectural plans, though the Planning and Zoning Director may accept the design professional's compliance letter in place of that staff inspection before directing the Building Official to issue the Certificate of Occupancy.
Violations & Fines
Occupying a building before the Certificate of Occupancy issues, or before the inspections Section 623.8 requires are completed and any failed work corrected, is a violation the Building Inspection Division and Planning and Zoning Department can act on. Failing an inspection triggers a reinspection fee under Section 623.8(c), and skipping the required site-plan compliance check or design-professional certification under Section 623.9 will hold up issuance of the Certificate of Occupancy altogether.
Frequently Asked Questions
Who schedules building inspections during construction in unincorporated Glynn County?
What happens if my project fails an inspection?
What do I need before I can get a Certificate of Occupancy?
Sources & Official References
Other rules in Glynn County
Compare Glynn County to another location·View the Georgia building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.