Skip to main content
CityRuleLookup

Glynn County, GA Building Safety: Plumbing Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Code adopted
2006 IPC with Georgia amendments
Permit fee
$30.00 stand-alone
Who may pull permit
Master Plumber, or owner-occupant
No-permit repairs
Faucet/valve repair, leak fixes
Appeal fee
$75.00

Summary

Plumbing work in unincorporated Glynn County needs a permit from the Building Official under the 2006 International Plumbing Code with Georgia amendments before work begins, generally issued only to a state-licensed Master Plumber. Minor faucet, valve, and leak repairs that don't change the piping are exempt.

These county ordinances apply to unincorporated areas of Glynn County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

The plumbing code adopted and prescribed for Glynn County is that code contained and identified as the International Plumbing Code, 2006 Edition With Georgia AmeNDMENTS ... a.No plumbing work, except as provided in subsection (g) of this Section, shall be undertaken prior to the issuance of a permit therefore by the Building Official, which permit shall be completed in duplicate and numbered in sequence ... $30.00 permit fee for any plumbing not covered by a valid all-inclusive building permit fee. ... g.Repairs involving only the working parts of a faucet or valve, the clearance of stoppages, repairing of leaks, or replacement of defective faucets or valves may be made without a permit, provided no changes are made in the piping to the fixtures. ... Any person, firm, corporation, or agent who shall violate any of the requirements of this ordinance and the provisions of the Plumbing Code, upon conviction thereof in a court of competent jurisdiction, shall be punished as for a misdemeanor under the provisions of O.C.G.A., § 36-13-12.

Full Breakdown

Section 2-5-71 adopts the 2006 edition of the International Plumbing Code with Georgia Amendments for the area of Glynn County outside Brunswick's city limits, again updating automatically with state amendments unless the Board of Commissioners deletes or modifies a portion. Section 2-5-72 extends that code to sanitary and storm drainage, venting, water supply piping, and the stormwater or sewerage connections serving any premises. Section 2-5-76(a) bars plumbing work before a permit issues, except for the minor-repair exemption in subsection (g), and every permit is completed in duplicate with a copy kept as a public record in the Building Official's office.

Section 2-5-76(b) generally limits permits to a Master Plumber holding a Georgia Certificate of Qualification, though subsection (c) lets a bona fide homeowner pull a permit to do the work personally on their own single-family residence. 00 for a variance or appeal application. Section 2-5-76(g) exempts repairs limited to the working parts of a faucet or valve, clearing stoppages, fixing leaks, or swapping a defective faucet or valve, as long as the piping itself is not changed. Section 2-5-79 classifies plumbers as Master, Journeyman, Apprentice, or Helper, and Section 2-5-82 requires anyone other than a supervised Journeyman to hold a Georgia Plumbing Contractor certificate to work in the county. A five-member Plumbing Board of Adjustments and Appeals, created under Section 2-5-80, hears appeals from Building Official decisions.

Violations & Fines

Section 2-5-85 makes any violation of the plumbing ordinance or the adopted Plumbing Code a misdemeanor under O.C.G.A. § 36-13-12. The Board of Commissioners can also pursue an injunction or other court action under Section 2-5-86 to stop unlawful plumbing installation, maintenance, extension, or alteration work in the county.

Frequently Asked Questions

Can a homeowner get their own plumbing permit?
Yes. Section 2-5-76(c) lets the bona fide owner of a single-family residence pull the permit personally, as long as they occupy the home, buy the materials themselves, and perform the labor themselves in compliance with the Plumbing Code.
Do I need a permit to fix a leaky faucet?
No. Section 2-5-76(g) exempts repairs limited to the working parts of a faucet or valve, clearing a stoppage, or fixing a leak, as long as you don't change the piping running to the fixture.
How much does a plumbing permit cost in Glynn County?
Section 2-5-76(e)'s fee schedule sets $30.00 for plumbing work not already covered by an all-inclusive building permit. A variance or appeal application to the Plumbing Board costs $75.00 under Section 2-5-76(h).

Sources & Official References

Other rules in Glynn County

All Glynn County rules

Compare Glynn County to another location·View the Georgia building safety overview

Get notified when Plumbing Permits in Glynn County, GA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.