Skip to main content
CityRuleLookup

Pasadena, TX Swimming Pools & Spas: Fencing & Safety Requirements (2026)

Light Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified April 2026

Key Facts

Barrier Height
48 inches minimum
Gate Type
Self-closing, self-latching
Driveway Gate
60 inches, motorized closer
State Law
TX Health & Safety Code Ch. 757

Summary

Pasadena requires pool barriers per Texas Health & Safety Code Ch. 757 and the ISPSC. Barriers must be at least 48 inches high with self-closing, self-latching gates. Driveway gates used as barriers must be at least 60 inches with motorized closers.

Sec. 757.003. ENCLOSURE FOR POOL YARD. (a) Except as otherwise provided by Section 757.005, the owner of a multiunit rental complex with a pool or a property owners association that owns, controls, or maintains a pool shall completely enclose the pool yard with a pool yard enclosure. (b) The height of the pool yard enclosure must be at least 48 inches as measured from the ground on the side away from the pool. (c) Openings under the pool yard enclosure may not allow a sphere four inches in diameter to pass under the pool yard enclosure.

Source: TX Health & Safety Code Ch. 757 – Pool SafetyView official code

Full Breakdown

Pool fencing in Pasadena follows Texas Health & Safety Code Chapter 757 and the adopted International Swimming Pool and Spa Code. Barriers around residential pools must be at least 48 inches (4 feet) high measured from the outside. Gates must be self-closing and self-latching with latches placed on the pool side. The barrier must not have gaps allowing a 4-inch sphere to pass through. Driveway gates used as part of the pool barrier must be at least 60 inches high, equipped with a motorized closer set to close within 30 seconds, and have backup power for outages. Decorative designs that make fences easily climbable from the outside are prohibited. Safety glazing (windows) within 5 feet of the water's edge and below 60 inches must meet special requirements.

Violations & Fines

Non-compliant pool barrier: citation and order to correct. Pool may be required to be drained until compliance.

Frequently Asked Questions

How tall must a pool fence be in Pasadena?
At least 48 inches (4 feet) measured from the outside. Driveway gates used as barriers must be at least 60 inches with motorized closers.
Do pool gates need to self-close?
Yes. All pool barrier gates must be self-closing and self-latching per the ISPSC and TX Health & Safety Code Ch. 757.

Sources & Official References

Other rules in Pasadena

All Pasadena rules

Texas rules heatmap·Compare Pasadena to another location·View the Texas swimming pools & spas overview

Get notified when Fencing & Safety Requirements in Pasadena, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Fencing & Safety Requirements in Nearby Cities

How other cities in Harris County handle fencing & safety requirements.

Tomball, TX
Light Restrictions
Baytown, TX
Light Restrictions
Humble, TX
Light Restrictions
Deer Park, TX
Light Restrictions
Bellaire, TX
Light Restrictions
Houston, TX
Light Restrictions
La Porte, TX
Some Restrictions